展覽主題
數位轉型
綠色轉型
威士頓精密工業股份有限公司
產品描述 :
■ 機器簡化輕巧、安裝容易、低噪音。
■ 使用油或水換熱製冷,不需補充冷媒。
■ 不受高溫環境影響,仍可正常運作。
■ 利用廠務水或冰水機循環水二次利用,達到節能減碳效果。
■ 無壓縮機，不使用冷媒，無GWP值。
善化工業股份有限公司
產品描述 :
善化工業股份有限公司專業生產符合SAE100R7、SAE100R8規範之高壓油管。<br />
擁有最多樣尺寸、顏色、配置及包裝供客戶選擇。<br />
產品特點為重量輕，約橡膠管重量的1/2，受壓力時，曲線不變。<br />
採用耐候、耐磨擦、耐油性的特殊材質。可耐用各式酸鹼，並可選擇外管顏色，便利於顏色管理，亦可選擇導電和非導電型，以確保機台人員的安全。<br />
用途方面，除了可以完全取代傳統橡膠管外，可用於各式高壓液體、高壓氣體、噴塗裝機、清水溝車、農業機具、轉向系統、船舶用管等，各式液、氣體配管均可使用。<br />
向揚工業有限公司
產品描述 :
2 STAGE ROTARY SCREW
強大的二級壓縮效能，超越一級壓縮
最高能效等級d=30
一直以來，我們的設計及製造技術，就是品質的最佳保證，這系列新的設計，我們運用兩段式 2 級壓縮的效能，製造出最高能效的空壓機，讓流量、耗電及溫度，都保持在最佳狀態，使螺旋式空壓機，更節能，更省電，更符合您的使用，不但大幅提高您的生產效率，也大幅節省用電量上的耗損。
HYDROKOMP GmbH
產品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
HYDROKOMP GmbH
產品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
