展覽主題
數位轉型
綠色轉型
富茂精機股份有限公司
產品描述 :
短型，高速，輕量型，迴轉油壓缸
設計有檢知裝置機構，可裝置感應式近接開關，行程容易調整，可確認油壓缸正確動作
內建逆止閥自鎖安全機構及內置壓力洩壓閥
兩用型，安裝時可由前端與後端鎖固
洩油孔配管務必單獨接回油壓槽，以避免產生背壓
HYDROKOMP GmbH
產品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
HYDROKOMP GmbH
產品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
全泰油壓機械有限公司
產品描述 :
為了解決清洗不易的問題，市場開發所謂箱外型過濾器，但仍然無法完全解決
問題１ 佔用空間過大
問題２ 多個泵浦組合系統須一對一配置產生接頭過多易發生漏油現象
問題３ 配管成本過高
本公司為了解決上述問題，開發一對二箱外磁性法蘭式過濾器，減少空間防止漏油問題降低組裝工時及零件費用
億檳企業有限公司
產品描述 :
1、以高度精煉礦物油為載體，防銹、潤滑、抗菌等一體化技術開發。
2、在加工中提供較好的潤滑冷卻性能，可延長油槽、提高刀具壽命。
3、良好的水溶性及分散性及硬水穩定性，適用於任何水質，不含硫、磷等添加劑，氣味低。
4、通過歐盟法規REACH 181項檢驗。
杰松自動化有限公司
產品描述 :
CytroPac是博士力士樂最新的集成式油壓動力單元，結合變頻馬達、液壓泵、油箱、過濾器、汙染指示等動力單元於一身，並具備與未來5G通訊世代接軌的乙太網路傳輸介面，真正體現高性能硬體與無遠弗屆軟體介面的完美整合。
安靜、節能、穩定、靈活調配等傳統油壓動力單元難以達到的性能表現，是讓Cytropac顯得突出與讓人期待的優勢，歡迎和我們一起來到未來工廠!
