展览主题
数位转型
绿色转型
先捷實業股份有限公司
产品描述 :
1.即戰型X、Y手搖輪傳動模式、標配光學尺精準定位,可針對乙-方向做粗至細電流加工。
2.工業用CPU處理器,搭配15吋彩色液晶螢幕、標配三軸解析度0.005mm歐洲原装進口光學尺。
3.研磨C7級以上浪珠螺桿及精密機械鏟花工藝,高韌性焠火處理FC25以上鑄鐵,搭配鑄件跨距高接觸面積可大幅提升機台可靠度,再搭配穩定規律的保養可確保機台精度、加工品質長年無顧慮。
4.TURBO高速加工迥路(選配),搭配V8系列積碳處理系統,透過FPGA高速精密集成式積體電路即時監控波型,確保加工效能精準輸出,並防止異常波型產生。
5.標配紅銅、石墨加工迴路切換,並在石墨薄片加工迴路上嶄新的突破。
6.針對多樣材質SKD11、P20、NAK80、STAVAX、不鋪鋼以及特殊材料鈦合金、鎳基合金、鈹銅、石墨,另外遣有針對超硬合金鎢鋼
(可選配EZ-SPARK迴路)等加工迴路。
7.饋式同服吸收系統設計,降低貫量,提升同服加工穩定性,搭配高剛性床台,加工大面積同 服更穩定,使加工表面更均勻。
8.智慧編輯系統,快速編輯加工参數,設定所需加工間隙(電極預留量)、加工面粗度及加工深度等,自動產出粗加工至細加工之加工参數包含更段電流之搖動OB加工量,可減少電極數量及提高製程效率。
(搖動功能需搭配COC-2801)
9.可儲存多組加工座標、加工檔案及編輯自訂加工參數,並搭配快捷鍵可以隨時呼叫使用或編輯到程式内使用。
HYDROKOMP GmbH
产品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
英屬維京群島商鑛騰有限公司台灣分公司
产品描述 :
美克迪立式綜合加工機突破傳統之設計原則,開發出集重切削、高精密模具切削、高速鋁合金切削、高速鑽孔加工於一身之多功能綜合加工機。除佔地面積小於業界相同行程尺寸的機器之外,更兼具高剛性、高可靠度、高精密度等優點。革命性的超高規格及配備,大幅超越業界之標準,單一機種可適用於精密模具業、航太產業、汽車零件大量生產、半導體精密零件生產,當然更適用於一般泛用生產之加工廠。
排除傳統繁雜之電控配線,美克迪MEGA/TERA系列產品配備最新EtherNet/IP內部通訊控制系統以及最佳化的人機工程學,是市面上操作最簡單,維修保養最容易之加工機。選用美克迪系列產品,極佳的操控加工性能,大幅提升您的產能,降低維修保養以及運轉成本。
美克迪MEGA/TERA系列將美國機械、電控、 人機介面之研發技術,結合台灣製造 團隊,累積近十年之高階品製造經驗,將C型結構綜合加工機之模具加工能力發揮到極致。 全系列標準配備:
■ 15,000 rpm內藏式主軸
■ 動態即時熱補償 (DYPEC)
■ 美克迪人機介面 (HMI)