展览主题
数位转型
绿色转型
全泰油壓機械有限公司
产品描述 :
為了解決清洗不易的問題,市場開發所謂箱外型過濾器,但仍然無法完全解決
問題1 佔用空間過大
問題2 多個泵浦組合系統須一對一配置產生接頭過多易發生漏油現象
問題3 配管成本過高
本公司為了解決上述問題,開發一對二箱外磁性法蘭式過濾器,減少空間防止漏油問題降低組裝工時及零件費用
HYDROKOMP GmbH
产品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
善化工業股份有限公司
产品描述 :
善化工業股份有限公司專業生產符合SAE100R7、SAE100R8規範之高壓油管。<br />
擁有最多樣尺寸、顏色、配置及包裝供客戶選擇。<br />
產品特點為重量輕,約橡膠管重量的1/2,受壓力時,曲線不變。<br />
採用耐候、耐磨擦、耐油性的特殊材質。可耐用各式酸鹼,並可選擇外管顏色,便利於顏色管理,亦可選擇導電和非導電型,以確保機台人員的安全。<br />
用途方面,除了可以完全取代傳統橡膠管外,可用於各式高壓液體、高壓氣體、噴塗裝機、清水溝車、農業機具、轉向系統、船舶用管等,各式液、氣體配管均可使用。<br />
培凱有限公司
产品描述 :
HiPerLip®為鐵氟龍翻唇式旋轉密封件,俗稱鐵殼油封或旋轉油封。具有低摩擦、低耗能的優異特性,可滿足設備的高應答、高精度性能要求。適於高速、低壓、潤滑不良、高溫、及高腐蝕性流體等環境的應用。HiPerLip®適用於輕~中負載之高速旋轉應用,使用溫度範圍可由-60°C至to 200°C (-76°F to 390°F),在低壓的應用旋轉速度可高達30 m/s (5,905 fpm),遠超過DIN3760的常用徑向旋轉密封件的材質(如NBR、ACM、FPM、VITON)等,其低摩擦特性可以減少摩擦熱,避免潤滑油脂碳化
HYDROKOMP GmbH
产品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.