展览主题
数位转型
绿色转型
HYDROKOMP GmbH
产品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
杰松自動化有限公司
产品描述 :
CytroPac是博士力士樂最新的集成式油壓動力單元,結合變頻馬達、液壓泵、油箱、過濾器、汙染指示等動力單元於一身,並具備與未來5G通訊世代接軌的乙太網路傳輸介面,真正體現高性能硬體與無遠弗屆軟體介面的完美整合。
安靜、節能、穩定、靈活調配等傳統油壓動力單元難以達到的性能表現,是讓Cytropac顯得突出與讓人期待的優勢,歡迎和我們一起來到未來工廠!
HYDROKOMP GmbH
产品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
全泰油壓機械有限公司
产品描述 :
為了解決清洗不易的問題,市場開發所謂箱外型過濾器,但仍然無法完全解決
問題1 佔用空間過大
問題2 多個泵浦組合系統須一對一配置產生接頭過多易發生漏油現象
問題3 配管成本過高
本公司為了解決上述問題,開發一對二箱外磁性法蘭式過濾器,減少空間防止漏油問題降低組裝工時及零件費用
富茂精機股份有限公司
产品描述 :
短型,高速,輕量型,迴轉油壓缸
設計有檢知裝置機構,可裝置感應式近接開關,行程容易調整,可確認油壓缸正確動作
內建逆止閥自鎖安全機構及內置壓力洩壓閥
兩用型,安裝時可由前端與後端鎖固
洩油孔配管務必單獨接回油壓槽,以避免產生背壓
台灣嘉剛國際股份有限公司
产品描述 :
外螺紋小型單動缸採用進口油封及零件,確保品質,使用時漏油量少,高壓夾持中保持長時間不漏油。
外螺紋式小型單動缸體積小,使用於夾具上,能在小的空間內排列使用。
此型式油壓缸使用於頂出場合,彈簧退回,無法使用於拉式場合上。
安裝時盡可能垂直於工作面,傾斜勿超過10°。
缸體底部需置放一個鎖緊防漏墊圈。
最大操作壓力:250 kgf/cm²
最小操作壓力:20 kgf/cm²
作動方式 :單動式