展览主题
数位转型
绿色转型
HYDROKOMP GmbH
产品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
HYDROKOMP GmbH
产品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
富茂精機股份有限公司
产品描述 :
短型,高速,輕量型,迴轉油壓缸
設計有檢知裝置機構,可裝置感應式近接開關,行程容易調整,可確認油壓缸正確動作
內建逆止閥自鎖安全機構及內置壓力洩壓閥
兩用型,安裝時可由前端與後端鎖固
洩油孔配管務必單獨接回油壓槽,以避免產生背壓
培凱有限公司
产品描述 :
[軸承隔離器]顧名思義是針對轉動設備滾動軸承的保護而開發的密封裝置,可取代傳統的唇形密封件(亦稱為橡膠油封),利用特殊配置的迷宮環組合,不但消除了轉動軸被唇形密封磨損而導致的軸心磨損,其軸承也因異物或水氣的侵入而引起潤滑油的劣化&失效問題,軸承隔離器可有效延長軸承與轉動軸心的使用壽命。另外因無對磨面的接觸故也無元件磨耗與汙染問題,整個密封件材料以耐熱自潤性及高強度的特殊填料聚四氟乙烯成搭配FKM (Viton) O型環非常適用於軸承轉動設備嚴苛的環境。
台灣嘉剛國際股份有限公司
产品描述 :
此系列產品設計中採用連杆機構, 在解除夾持狀態時, 壓臂可拉到低於夾持面的位置, 減少對工件裝卸的干涉, 因此操作方便, 缸體採用一體成型。
產品動作軌跡非常小, 用傳統的轉角缸/ 杠杆缸都難以夾持到的部位均可以達到夾持作用, 並可以減少對周圍機器設備的干擾, 達到節省工作空間的目的。產品採用了專用防塵設計, 防止了切削及冷卻液的滲入, 實現了高密封性, 因此在比較惡劣的環境下也能使用。
最大操作壓力:70 kgf/cm2
最小操作壓力:10 kgf/cm2
杰松自動化有限公司
产品描述 :
CytroPac是博士力士樂最新的集成式油壓動力單元,結合變頻馬達、液壓泵、油箱、過濾器、汙染指示等動力單元於一身,並具備與未來5G通訊世代接軌的乙太網路傳輸介面,真正體現高性能硬體與無遠弗屆軟體介面的完美整合。
安靜、節能、穩定、靈活調配等傳統油壓動力單元難以達到的性能表現,是讓Cytropac顯得突出與讓人期待的優勢,歡迎和我們一起來到未來工廠!
培凱有限公司
产品描述 :
HiPerLip®為鐵氟龍翻唇式旋轉密封件,俗稱鐵殼油封或旋轉油封。具有低摩擦、低耗能的優異特性,可滿足設備的高應答、高精度性能要求。適於高速、低壓、潤滑不良、高溫、及高腐蝕性流體等環境的應用。HiPerLip®適用於輕~中負載之高速旋轉應用,使用溫度範圍可由-60°C至to 200°C (-76°F to 390°F),在低壓的應用旋轉速度可高達30 m/s (5,905 fpm),遠超過DIN3760的常用徑向旋轉密封件的材質(如NBR、ACM、FPM、VITON)等,其低摩擦特性可以減少摩擦熱,避免潤滑油脂碳化