展览主题
数位转型
绿色转型
培凱有限公司
产品描述 :
HiPerSeal®是一種U型鐵氟龍內裝特殊彈簧的高性能彈簧密封件,俗稱彈簧油封或彈簧致動油封。鐵氟龍彈簧油封是由適當的彈簧力加上系統流體壓力,將密封唇(面)頂出而輕輕壓住被密封的金屬面以產生優異密封的效果。彈簧的致動效應可以克服金屬配合面的輕微偏心以及密封唇的磨耗,而持續保有預期的密封性能。它能利用各種特殊彈簧來克服鐵氟龍或其他高性能橡膠塑料的彈性問題,開發出可取代絕大數應用於靜態或動態(往復或旋轉運動)的密封件。而彈簧可因應不同的使用環境,選用不鏽鋼、Elgiloy®、Hastelloy® 等,故可應用於各種高溫腐蝕流體的場合。我們提供廣泛的彈簧選擇,其中包含斜圈彈簧(C型彈簧 - Canted Coil Spring)、螺旋彈簧(H型彈簧 - Helical Spring)、懸臂彈簧(V型彈簧 - Cantilever Spring)。
HYDROKOMP GmbH
产品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
台灣嘉剛國際股份有限公司
产品描述 :
此系列產品設計中採用連杆機構, 在解除夾持狀態時, 壓臂可拉到低於夾持面的位置, 減少對工件裝卸的干涉, 因此操作方便, 缸體採用一體成型。
產品動作軌跡非常小, 用傳統的轉角缸/ 杠杆缸都難以夾持到的部位均可以達到夾持作用, 並可以減少對周圍機器設備的干擾, 達到節省工作空間的目的。產品採用了專用防塵設計, 防止了切削及冷卻液的滲入, 實現了高密封性, 因此在比較惡劣的環境下也能使用。
最大操作壓力:70 kgf/cm2
最小操作壓力:10 kgf/cm2
台灣嘉剛國際股份有限公司
产品描述 :
外螺紋小型單動缸採用進口油封及零件,確保品質,使用時漏油量少,高壓夾持中保持長時間不漏油。
外螺紋式小型單動缸體積小,使用於夾具上,能在小的空間內排列使用。
此型式油壓缸使用於頂出場合,彈簧退回,無法使用於拉式場合上。
安裝時盡可能垂直於工作面,傾斜勿超過10°。
缸體底部需置放一個鎖緊防漏墊圈。
最大操作壓力:250 kgf/cm²
最小操作壓力:20 kgf/cm²
作動方式 :單動式
HYDROKOMP GmbH
产品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.