展览主题
数位转型
绿色转型
HYDROKOMP GmbH
产品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
台灣嘉剛國際股份有限公司
产品描述 :
外螺紋小型單動缸採用進口油封及零件,確保品質,使用時漏油量少,高壓夾持中保持長時間不漏油。
外螺紋式小型單動缸體積小,使用於夾具上,能在小的空間內排列使用。
此型式油壓缸使用於頂出場合,彈簧退回,無法使用於拉式場合上。
安裝時盡可能垂直於工作面,傾斜勿超過10°。
缸體底部需置放一個鎖緊防漏墊圈。
最大操作壓力:250 kgf/cm²
最小操作壓力:20 kgf/cm²
作動方式 :單動式
培凱有限公司
产品描述 :
[軸承隔離器]顧名思義是針對轉動設備滾動軸承的保護而開發的密封裝置,可取代傳統的唇形密封件(亦稱為橡膠油封),利用特殊配置的迷宮環組合,不但消除了轉動軸被唇形密封磨損而導致的軸心磨損,其軸承也因異物或水氣的侵入而引起潤滑油的劣化&失效問題,軸承隔離器可有效延長軸承與轉動軸心的使用壽命。另外因無對磨面的接觸故也無元件磨耗與汙染問題,整個密封件材料以耐熱自潤性及高強度的特殊填料聚四氟乙烯成搭配FKM (Viton) O型環非常適用於軸承轉動設備嚴苛的環境。
HYDROKOMP GmbH
产品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
培凱有限公司
产品描述 :
HiPerLip®為鐵氟龍翻唇式旋轉密封件,俗稱鐵殼油封或旋轉油封。具有低摩擦、低耗能的優異特性,可滿足設備的高應答、高精度性能要求。適於高速、低壓、潤滑不良、高溫、及高腐蝕性流體等環境的應用。HiPerLip®適用於輕~中負載之高速旋轉應用,使用溫度範圍可由-60°C至to 200°C (-76°F to 390°F),在低壓的應用旋轉速度可高達30 m/s (5,905 fpm),遠超過DIN3760的常用徑向旋轉密封件的材質(如NBR、ACM、FPM、VITON)等,其低摩擦特性可以減少摩擦熱,避免潤滑油脂碳化
富茂精機股份有限公司
产品描述 :
短型,高速,輕量型,迴轉油壓缸
設計有檢知裝置機構,可裝置感應式近接開關,行程容易調整,可確認油壓缸正確動作
內建逆止閥自鎖安全機構及內置壓力洩壓閥
兩用型,安裝時可由前端與後端鎖固
洩油孔配管務必單獨接回油壓槽,以避免產生背壓