展览主题
数位转型
绿色转型
HYDROKOMP GmbH
产品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
兆義新實業有限公司
产品描述 :
高效物理空壓式乾燥機，應用專利水冷式降溫系統及氣水分離裝置，將高溫壓縮空氣藉由水冷及壓縮空氣膨脹的方式，降至露點溫度產生冷凝水，再利用氣水分離裝置，使壓縮空氣與冷凝水分離，分離效率可達99％，不須壓縮機及冷媒，免用電、免耗材、免保養，更可使效能永久不減，乾燥機壽命平均達10年以上。
1. 利用壓縮空氣本身的特性，使之產生物理變化，採用獲發明專利之熱交換桶及氣水分離裝置，將高溫壓縮空氣降至低溫-露點溫度，再使壓縮空氣及水分自然分離。（發明專利：美、日、韓、歐洲、大陸、台灣）
2. 使壓縮空氣自體離心特性，設備內無任何外力機械結構，因此無須維修及保養。
3. 免用電、免耗材、不需使用冷媒，每月可省下龐大電費及耗材更換費用。（濾油機型需更換精密過器）
4. 獲發明專利之氣水分離裝置可使壓縮空氣離心達到最佳化，濾水乾燥效果可達99﹪。
5. 利用離心特性有效過濾空壓機中之水分、灰塵、繡、不純物及油汙，提供氣動設備全方位的防護。（請依自身設備需求加購精密過濾器）
6. 出口溫度接近常溫，可減少管路水之產生，並有效處理管路水問題。（管路水處理請參考＜管路設計及管路水處理＞）
7. 無任何電子及其他能源驅動設備，適合環境較為特殊之壓縮空氣需求者使用。
8. 機體內所有零件及組裝均在台灣生產製造，以確保高品質。
詳細產品規格請前往此連結：https://www.isin.net.tw/product_d.php?lang=tw&tb=1&id=49
HYDROKOMP GmbH
产品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
