展览主题
数位转型
绿色转型
HYDROKOMP GmbH
产品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
善化工業股份有限公司
产品描述 :
善化工業股份有限公司專業生產符合SAE100R7、SAE100R8規範之高壓油管。<br />
擁有最多樣尺寸、顏色、配置及包裝供客戶選擇。<br />
產品特點為重量輕,約橡膠管重量的1/2,受壓力時,曲線不變。<br />
採用耐候、耐磨擦、耐油性的特殊材質。可耐用各式酸鹼,並可選擇外管顏色,便利於顏色管理,亦可選擇導電和非導電型,以確保機台人員的安全。<br />
用途方面,除了可以完全取代傳統橡膠管外,可用於各式高壓液體、高壓氣體、噴塗裝機、清水溝車、農業機具、轉向系統、船舶用管等,各式液、氣體配管均可使用。<br />
HYDROKOMP GmbH
产品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
培凱有限公司
产品描述 :
[軸承隔離器]顧名思義是針對轉動設備滾動軸承的保護而開發的密封裝置,可取代傳統的唇形密封件(亦稱為橡膠油封),利用特殊配置的迷宮環組合,不但消除了轉動軸被唇形密封磨損而導致的軸心磨損,其軸承也因異物或水氣的侵入而引起潤滑油的劣化&失效問題,軸承隔離器可有效延長軸承與轉動軸心的使用壽命。另外因無對磨面的接觸故也無元件磨耗與汙染問題,整個密封件材料以耐熱自潤性及高強度的特殊填料聚四氟乙烯成搭配FKM (Viton) O型環非常適用於軸承轉動設備嚴苛的環境。
培凱有限公司
产品描述 :
培凱在密封領域的貢獻就是能創造全方位的密封解決方案。縱使對於極為複雜的密封介質也能駕輕就熟。
機械軸封是目前最理想的密封方式,對於任何條件(尤其高溫&高壓&高黏度(沉積物)&高速&大口徑等)皆能提供最適合的對應方式,最重要的是我們有非常專業的技術團隊可及時提出解決方案並量身訂製您所期待的設計規劃。
再者,站在使用者角度將極為複雜的工況&條件透過材料的特性&產品機能的擴充創造機械軸封最大的使用極限與價值,讓密封技術變得很簡單。
HYDROKOMP GmbH
产品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.