Theme
Digital Transformation
Green Transformation
TAIWAN PRECISION GEAR CORP.
Product Description :
1. 提供7.5-200寬幅的比數範圍選擇。<br />
2. 于80-200的高減速比下，能提供較強的扭力值。<br />
3. 安全係數至少保持1.0，物超所值。<br />
4. 齒輪傳動效率高達90%<br />
5. 彈性的馬達選配，可依需求搭配交流、直流或無刷馬達。<br />
6. 出力端可選擇中空孔或實心出力軸。<br />
7. 採用高品質黃油潤滑，免加油，低維修成本。<br />
8. 低噪音，提供安靜的作業環境。<br />
9. 交流馬達可選用三相60-120W，單相70-90W<br />
10. 鋁合金接線盒，輕巧美觀，安全耐用。<br />
11. 馬達F絕緣等級，IP54，可選擇全密或半密設計。<br />
12. 可加裝剎車或配合變頻器與控制器，改變轉速。<br />
• 3 PHASE: 60W, 100W, 120W<br />
• 1 PHASE: 45W, 60W, 90W<br />
• 減速比：1:7.5-200<br />
Taiwan TeamA Tech. Co., Ltd.
Product Description :
擺脫時間、地點的限制，利用自動化生產解決方案再創生產率新高！無需人工操作，24小時不停機生產，製造大量、高質量物件，使用 Formlabs 自動化解決方案（包含 Form Auto、群機管理和高容量樹脂系統），在 3D 列印工作流程中更高效的工作並重新定義生產能力。在不增加列印機管理複雜性的情況下擴展您的零件生產。從任何地方點擊發送，Formlabs 自動化解決方案將處理剩下的工作流程。
【最大程度地降低每個零件的成本，節省高達 80% 的勞動力】
在 Form Auto 出現之前，每個完成的零件都需要在後處理之前從成型平台上手動移除。Form Auto 透過將 Formlabs 獲得專利的「快速剝離技術」與「成型平台 V2 」結合使用，完全自動化地移除零件。蒐集的零件被放置在防紫外線的容器中，無縫批量轉移到 Form Wash。
【24 小時不間斷 3D 列印，無需額外程序】
Form Auto 自動化生產系統旨在不閒置列印機、不讓列印物件在序列中等待，無論現場是否有操作人雃，Form Auto 始終準備好開始下一次列印。 隨時隨地構建多列印機群，從辦公室點擊「列印」，立即在生產間開始生產。透過群機管理中的圖像和影片遠程監控和審查成品零件，設備內相機在完成時捕獲每個列印件來保存每個部分的記錄。
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
Go power machinery CO.LTD
Product Description :
Its cam rotary table internally adopts cam roller transmission mechanism. There’s rolling backlash-free drive between multi-rollers and cam surface pre-load, with no need for periodic calibration and adjustment. This product is featured with high rigidity, heavy load,
and high efficiency. Cam lift exchange mechanism internally adopts cam lift and rotation structure, which has strong rotation lifting ability, faster speed and positioning higher accuracy.
