Theme
Digital Transformation
Green Transformation
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
GREEN ECO PRO CO. LTD.
Product Description :
Chip Vacuum Removal System
FC Series
Used by Negative vacuum principle, and increase high absorption of air to get filter cycle. Intercept particulate matter and impurity.
Processing cycle
Zero Power consumption
CNC Machine No Stop
Waste material a few water
No Consumable
Reduce wastage of coolant
Promote Volume of Water Tank
Promote productivity
ZHAO YI HSIN INDUSTRIAL CO., LTD.
Product Description :
Providing clean compressed air without energy consumption
No power required
Applying characteristics of compressed air, hydromechanics and physical principles to design internal structure.
Consumable-free, maintenance-free
Exclusive patented structural design can separate moisture from compressed air without consumables.
Efficiency of air drying and moisture filtration: 99%
Patented high efficiency water-cooled heat exchanger and special air-water separation structure.
High quality, durable, and longevity up to 10 years
No compromise on quality, the product is made in Taiwan.
No electronic and other energy-driven device
Suitable for those who have special needs for compressed air.
SONG GIA INDUSTRIAL CO., LTD.
Product Description :
●精密鉸孔神器-浮動鉸刀柄，可解決以下問題：
1. 孔的直線行差
2. 鉸刀不耐用
3. 孔的尺寸擴大，尺寸精度達不到要求
4. 孔的中間大，兩頭小，圓柱度達不到要求
5. 內孔表面粗糙度達不到要求
6. 大批生產時無法保證孔徑尺寸的一致性 。
●浮動鉸刀柄的特點：
1.可透過360度浮動讓鉸刀對準下孔徑，避免對不準而造成擴孔或縮孔
2.徑向振幅抑制在5μm以下
3.提高鉸孔光潔度
4.彌補車床公差，提高鉸孔精密度
5.提高鉸孔的直線度和圓柱度
●浮動鉸刀柄可應用加工機械：鑽床、立式加工中心、研磨機。 可夾持工具：鉸刀、滾光刀
**產品連結→→https://www.songgia.com.tw/tw/products/other-tools/floating-reamer-holder
SONG GIA INDUSTRIAL CO., LTD.
Product Description :
【CROSS DRILLING/MILLING UNIT, 3-SPINDLE】
Speed ratio : 1:1
Maximum speed : 8000RPM
Tool clamping : ER11M
【DRILLING/MILLING UNIT FOR SUB SPINDLE】
Speed ratio : 1:1
Maximum speed : 8000RPM
Tool clamping : ER11
Machine :
33mm : SR-20R : STRB111203
36mm : SB-20R : STBB111201
47mm : SR-32J : STRB111301
ACCUTEX TECHNOLOGIES CO., LTD.
Product Description :
Linear Shaft Motor
Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%
1/1000 High Resolution Signal Process
High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.
Stable Discharge Board (SD-Master)
Irregular Thickness Cutting
The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.
PCD Cutting & Graphite Machining Power supply
The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.
PINNACLE MACHINE TOOL CO., LTD.
Product Description :
嵩富DV系列針對模具、精密零件加工需求所設計的高剛性主軸，BT50-8000轉強力直結式主軸、搭配高低檔齒輪箱(全齒式-無皮帶); 可粗切、精修一次完成。亦可選擇高速BT50內藏主軸或BT40直結式主軸，以符合不同的加工需求。<br />
DV系列X軸1700~4000mm，Z軸900~1100mm，門寬1400~2100mm，全採用高級米漢納鑄鐵、並可選擇90度頭 /延伸頭 / 角度頭 / 萬能頭 / BC頭 / 5面頭 / 5軸頭、自動立臥換刀、自動換頭倉，更有彈性應用、減少工序、提高率能。<br />
CHING HSYANG MACHINERY INDUSTRY CO., LTD
Product Description :
1. This machine is designed for internal and external shaving of round
tubes.
2. The center line of the processed object and the insert head is accurate.
3. The clamping die and the insert head are designed to be uniform, and
the work piece can be processed uniformly at one time.
4. The insert head is specially designed, the blade is standardized, and the
adjustment tool is simple and fast.
5. Feeding by manual, automatic advance and retreat blade, fast speed,
suitable for material steel pipe, iron pipe, aluminum pipe, copper pipe,
stainless steel pipe, plastic pipe, non-metal material and carbon fiber
pipe.
6. The machine is randomly matched with the multiple clamp, which can
be applied to different pipe diameters, saving time and cost for
replacing the clamp.
