Theme
Digital Transformation
Green Transformation
Taiwan Auto-Design Co.
Product Description :
Polytec 3D Scanning Vibrometers are state-of-the-art
for noise and vibration measurement in research and
development. Using three independent scanning
heads they deliver the full information on all vibrational
directions. The PSV-500-3D determines operational
deflection shapes and Eigenmodes for NVH, acoustics,
structural dynamics, ultrasonics, and FEM validation.
The high frequency version up to 25 MHz extends the
application range to non-destructive evaluation (NDE)
research. Every PSV-500-3D integrates perfectly into the CAE world providing interfaces to 3D geometries,
modal analysis and automation. The scanning heads
based on helium-neon laser allow measurements
even on tiny structures due to their especially small
laser spot.
PSV Scanning Vibrometers are available as
a compact laptop version or as a practical rack-type
workstation.
WIN-HIGH CO., LTD.
Product Description :
牌號: 適用加工材料:<br />
<br />
MD10 厚度小於0.2毫米的銅、鋁等薄片<br />
<br />
MD15 銅、鋁、不銹鋼等薄片<br />
<br />
MD20 通用性強，銅、鋁等薄片<br />
<br />
MD35A Q195 、SPCC等冷軋板<br />
<br />
MD36 EI 片、SPCC板等<br />
<br />
MD40A Q195 、SPCC等冷軋板<br />
<br />
MD45A 矽鋼片，冷軋板<br />
<br />
MD55 矽鋼片，上下沖頭<br />
<br />
ST05B 耐磨性好，模腔形狀簡單的模具。<br />
<br />
ST15B 通用性強，軟磁材料，鐵、銅基粉末模具。<br />
.<br />
ST10F 超細晶粒，適合硬磁材料成形模具。<br />
<br />
MD45A 適合型腔複雜的模具。<br />
<br />
MD50A 適合高負荷且型腔很複雜的模具。<br />
<br />
ST10B 綜合性能好，加工實木、密度板、刨花板及灰口鑄鐵、有色金屬等材料。<br />
<br />
ST10C 通用性強，加工實木、密度板、灰口鑄鐵、有色金屬等材料。<br />
<br />
ST03F 超細晶粒，抗腐蝕性能好、高耐磨，適用於有腐蝕介質的竹木刀具及製動材料的切削刀具。<br />
<br />
ST05F 超細晶粒，高硬度、高耐磨，適用於竹木刀具。<br />
<br />
ST10F 超細晶粒，適合製作形狀簡單的木工刀具和加工銅鋁合金、PCB、玻纖強化材料、制動材料、 <br />
石墨。<br />
<br />
ST11F 超細晶粒，適合加工硬木、密度板、刨花板等木工,竹木材料及加工鋁合金、淬硬鋼、冷硬鑄 <br />
鐵、制動材料。<br />
<br />
ST12F 超超細晶粒，適合加工刨花板, 不銹鋼、高淬硬鋼（硬度＞HRC60）、玻纖強化材料，尤其適 <br />
合金屬的高速切削和乾切削。<br />
<br />
ST15F 超細晶粒，適合加工硬木、密度板、刨花板等木工材料及纖維強化材料。<br />
<br />
ST20F 通用性強，主要適用於灰口鑄鐵、冷硬鑄鐵、合金鋼等。<br />
<br />
ST25F 高溫合金、不銹鋼、鈦合金、淬硬鋼、絲錐。<br />
<br />
MD46A 耐磨性要求高，縮徑、單次變形量小的模具。<br />
<br />
MD50A 加工不銹鋼以及單次變形量不大的模具。<br />
<br />
MD60A 直桿，螺絲，螺帽上模等。<br />
<br />
MD62A 工作負荷較大的沉頭模具。<br />
<br />
MD65A 工作負荷較大的直桿模具。<br />
<br />
MD70A 螺帽下模、工作負荷大的模具<br />
ST06F 直徑小於1.5mm的鋼絲、鎢絲、鉬絲等硬材高速拉絲拉拔和表面光潔度要求很高的有色金屬線 <br />
材的拉製。耐腐蝕性強，在酸性潤滑拉伸時更為優越。<br />
<br />
ST19F 直徑在1.5mm～15mm範圍內的鋼絲、鎢絲、鉬絲等硬材高速拉絲拉拔和表面光潔度要求高的 <br />
有色金屬管（線）材的拉製。<br />
<br />
ST10UF 700系鋁、PCB、銅鋁合<br />
<br />
ST25EF 不銹鋼、模具鋼、高溫合金
NUMEN MACHINERY CO., LTD.
Product Description :
* Double column structure and high rigidity design can
provide mold processing industry with high precision
and high efficiency of the performance.
* The superior cutting rigidity, more user-friendly
operation mode and machine stability can improve
the efficiency of operators.
Go power machinery CO.LTD
Product Description :
Gutian Cam NC Rotary Table internally adopts cam roller transmission mechanism.
There is backlash-free rolling drive between cam and needle bearings pre-load, no sliding
friction or backlash. Its positive reverse motion has high repeatability accuracy, without theneed for periodic calibration and adjustments. This product is featured with high rigidity,heavy load, high efficiency, and its accuracy is not affected by rising temperature.
GIFU ENTERPRISE CO., LTD.
Product Description :
Applicable Specification:
BT40/CAT40/DIN40/HSK63/CAPTO6
Applicable Model:
Multi-Tasking Machines
1.L-shape arm allows speedy tool changing with short sequence. Besides, low swing loading makes long product service life.
2.The main chain wheel is driven by servo motor, which achieves accurate positioning, fast tool selection and multi-tasking tool management.
3.The long-distance movement is driven by servo motor, which achieves fast and accurate positioning.
4.Expandable tool storage.
RAISE PRECISION CO., LTD.
Product Description :
CAPTRON, pioneer of the first capacitive two-hand control system, ensure the highest safety category according to (Cat. 4) and PL e (DIN EN ISO 13849-1). The capacitive "safeCAP" two-hand control allows heavy machinery and systems in automated production plants, such as presses and punches, to be controlled safely and without pressure.
To start the machine the user simultaneously presses two capacitive buttons which are connected to a safety relay. Incorrect or inattentive control using just one hand or with another part of the body is detected by the system and the machine is not started.
CAPTRON supplies the safeCAP two-hand control with additional safety elements such as the Protector or the control desk for tabletop installation. These combinations enhance protection and are certified to DIN EN 574. The dynamically switching SENSORswitches detect interference factors such as dirt, dust or foreign bodies. The switches can be actuated using disposable or work gloves, however.
