Theme
Digital Transformation
Green Transformation
RINGTECH INSTRUMENTS CO., LTD.
Product Description :
IFP vacuum cleaning machine can effectively clean any size and structure of complex metal products, great for either large or small amount of cleaning, it is also the best vacuum cleaning machine available for environmental protection and energy-saving! The cleaning cycle is carried out in a complete vacuum environment that the working environment is clean and odourless. During operation, the user can select different options from spray, rotate, ultrasonic, rinse...etc. based on the workpiece. With the cutting edge iFP cleaning technology, overcoming difficult cleaning situations such as cleaning blind holes, slits can be effortless. After cleaning, the chips and residual cutting oil will be separated from the cleaned workpiece, the chips are fully dried and can be collected from the filter; the residual cutting oil will also be separated from water and could be recycled and reused.
Facing the new industry trend and the new future, IFP cleaning machine is your best cleaning choice!
CAPTAIN SCIENCE CORPORATION
Product Description :
GENERAL DESCRIPTION RTB bearings (standabearings consist of a L-shaped inner ring - complet-ed with a washer -, an outer ring, two roller thrust bear-ings and a cylindrical roller bearing, full complement.Unitec has modified the inner design of RTB bearings and therefore load-carrying capacity and stiffness values may differ from the ones of past designs indicated on previous catalogues. The axial and radial load ratings have been calculated according to UNI ISO 76 and UNI ISO 281 standards.
G-TECH INSTRUMENTS INC.
Product Description :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
JASON AUTOMATION CO., LTD.
Product Description :
WRE(E) direct operated proportional directional control with integral feedback are available with or without on-board electronics (OBE). Positive overlap spools reduce leakage at center, while underlap spools can be utilized for closed-loop functions. Individual amplifiers are available, while OBE models are possible with either a voltage or current command.
G-TECH INSTRUMENTS INC.
Product Description :
To reduce damages caused by accidental collision, and to record collision events.
✓ Smart monitoring box consisting of sensors & electronics
✓ High bandwidth MEMS tri-axial accelerometer (X, Y & Z)
✓ Relay triggered in less than 1 millisecond upon a collision
✓ Built-in data log for max. 5,000 collision events
✓ Easy installation on machine structure
✓ Easy software for threshold setting & logging
✓ Economically priced
CHIEN CHENS MACHINERY CO., LTD.
Product Description :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
Y slide way width: 720 mm
Z Slide high: MAX 810 mm
Z Slide way width: 420 mm
Spindle taper: NT#40(BT)
Spindle motor: 5HP / 4P
Spindle speed: 70~3600 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3500 kgs
SGCAM TECHNOLOGY CO., LTD.
Product Description :
主功能介紹：<br />
全中文畫面，易學、易懂、易用，為加工業最適合的加工軟體，操作軟體完全不用背指令。<br />
可由AutoCAD製圖畫出工件外形，再匯入DXF、IGS圖檔，轉換為CNC程式碼。<br />
不必畫3D圖形，一條輪廓線和一條路徑線一般2D圖即可輕鬆轉出車銑的加工程式。<br />
快速C軸填充式的輸入方式 ，很簡單的方式就能轉出C軸加工程式。<br />
參數式的C軸工法操作條件更改G碼自動跟著改變。<br />
製作程式時車銑工法可依加工順序任意作排序調整。<br />
3D實體切削模擬預覽，可避免干涉及過切事件發生。<br />
主軸和副主軸的獨動或同動會自動等待(指定機型) 。<br />
同一個程式中可同時指定不同的切削計算方式有走刀式、走心式、櫛式。<br />
車銑的刀具庫參數可依實際機台型號的刀具位置做個別指定。<br />
可在端面、圓弧面、橢圓面上做刻字。<br />
支援單筆劃字型刻字。<br />
系統支援：<br />
支援廠牌有Citizen 、Star、Miyano、Tsugami、洽群、縉錩、利高、精機、瀧澤、程泰、寶麗金…<br />
支援側銑側鑽等循環加工指令G87、G88、G184<br />
支援極座標G12.1 、G13.1、 G112 、G113<br />
支援圓筒補間G07.1、G107
HABOR PRECISION INC.
Product Description :
> Applications
Spindle, Linear Motor, Ball Screw, Grinding Liquid, CNC Cutting System, CNC Lathe, Other Machining Center
> Feature
Prevent deterioration of liquid.
Open coil type heat exchanger can prevent the obstruction problem of liquid circulating system.
Advance the speed of process.
Maintain the stability of dielectric fluid, advance the process quality.
Avoid fire risk cause by temperature rise and accumulating of dielectric fluid, advance the working safety.
Reduce the wastage of electrode.
Prevent the spreading of foul odor air, reduce the air pollution.
Easy operation and low noise.
Made of anticorrosive material.
