Theme
Digital Transformation
Green Transformation
DEEP JET INDUSTRY CO., LTD.
Product Description :
1.Special cutting-edge design with low resistance to reach better chip-off from the groove. This shows the tool's stability in high speed machining.
2.The special coating enhances the anti-oxidation and wear resistance to increase high speed performance.
◆Carbide Drills With Internal Coolant Holes:
Internal coolant holes can highly increase the performance of cooling and chip removal rate.
◆Carbide Flat Drills:
Good for curve and inclined surface machinning.
L & L MACHINERY INDUSTRY CO., LTD.
Product Description :
Smart heavy-duty multi-axis composite cutting machine, LLS-M, for the target industry market (oil industry, aerospace industry, steel industry and rubber and rubber industry), achieved ALL Processes In One Machine to reduce the clamping and shortening process, with precision and life management The intelligent machine, constructing the machine information management platform and man-machine management interface, integrating the computer numerical controller, the smart set-top box and the cloud product life cycle database, providing relevant data and data through artificial intelligence calculation analysis and application, reaching the machine Accuracy and life and performance improvement, and applied to the virtual reality pre-sales service system, the use of the real-life expansion after-sales service system to build a smart mechanical value service chain.
Samwell Testing Inc.
Product Description :
PSV QTec Scanning Vibrometers take full-field vibration mapping to the next level with unrivalled optical sensitivity! Their innovative, patented QTec® technology uses multi-path interferometry based on infrared (SWIR) laser granting high-fidelity measurements on all surfaces from DC to 25 MHz. PSV QTec significantly reduce testing time - especially on dark, biological, rotating or moving objects, determining operational deflection shapes and Eigenmodes for NVH, acoustics, structural dynamics, ultrasonics, FEM validation and NDT.
SCN MACHINERY CO., LTD
Product Description :
180°油壓反轉合模機 - SDP series<br />
<br />
Tonnage: 50 - 600 ton<br />
Bolster Area: 1000 x 800 - 4500 x 3000 mm<br />
<br />
龍門型高強性、高精度機身設計，操作簡單的控制系統。<br />
動作精確，機台易操作，可減少勞動者的勞累，提高工作安全。<br />
適用於各類精密成型模具精修。(沖壓模、射出模、鋁壓鑄模)<br />
上模可180°完全翻轉，方便工作人員精修模具。<br />
標準附件：10"LCD觸控螢幕。<br />
符合ISO 9001:2015認證
SGCAM TECHNOLOGY CO., LTD.
Product Description :
國內市佔率最高的CNC車床CAD/CAM軟體<br />
全中文畫面，簡單易學、繪圖快速，最符合加工業使用的CAD/CAM軟體<br />
可由AutoCAD製圖畫出工件外形，再匯入DXF圖檔，轉換為CNC程式碼。<br />
3D動態實體切削模擬，可預先檢視切削路徑避免刀具干涉及過切。<br />
可設定架刀的安全角度，減少刀刃整面接觸工件而抖動，使刀具壽命延長。<br />
自動檢查、過濾、斷線、刪除重疊線段。<br />
準確的計算加工時間和工件重量，給予客戶精確的報價訊息，即時的爭取客戶的信任與訂單，決解你接單報價的困擾。<br />
支援完整切削複合循環功能G71、G72、G74、G75(不規則形狀也可使用G75) 。<br />
智慧型沿輪廓加工，節省加工時間(G73改良型) 。<br />
智慧型自動挑刀、斷屑、分層，直線、圓弧皆可自動做斷屑或暫停的動作，再也不用為斷刀而傷透腦筋了。<br />
人性化的刀庫設定，可依每位使用者設定不同的常用刀具。<br />
可做特殊造型螺紋切削、連續螺紋多牙嘴 。<br />
刀具路徑圖形化，刀具路徑也可直接作編修，編修完成G碼立即更改。<br />
弧長、角度、斜度比自動換算功能。
ICOP Technology Inc.
Product Description :
The QEC-M series is an EtherCAT master that uses a dual-core, independently operating DM&P Vortex86EX2 processor for real-time, reliable synchronous EtherCAT control. The master core of the processor serves as the Arduino development environment; the slave core of the processor serves as the Real-time EtherCAT master. The two cores exchange data via Inter-Processors Communications (IPC).
VICTOR TAICHUNG MACHINERY WORKS CO., LTD.
Product Description :
．One piece 30˚ slant bed with large swing diameter
．10" Power chuck / 3500 rpm (A260)
． Z-axis travel 750 mm
．High thrust force by small pitch ballscrew
．High rapid feed 24 m/min (Z-axis)
．Shortened belt driven spindle
．Digital tailstock
．8” chuck for subspindle (opt.)
TAI CHONG CO., LTD.
Product Description :
用途： CNC切削中心機，銑床，龍門銑床，電腦銑床等切削作業。<br />
特性：<br />
本體與面板一體成型加工完成。<br />
以電控操作，快速充脫磁場變換。<br />
以永久磁鐵吸著工件，沒有停電的危險性。<br />
吸磁作業面，螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊，針對變形平面，作平面加工，大量節省調整時間，提高工作效率。<br />
結構剛性佳，配合精度穩定，適合高精度加工作業。<br />
與強力型電磁鐵比較，大幅度節省電力消耗。<br />
防水效果最確實，保證不漏水，不漏電。<br />
平均吸磁力18kgf/cm2以上。
