Theme
Digital Transformation
Green Transformation
E-TECH MACHINERY INC.
Product Description :
EGM series is a combinations of grinding operations for internal, external, end-face, groove, radius, internal and external step, and taper grinding can be executed in one chucking. Thus, it greatly increases grinding efficiency and also ensures better concentricity and accuracy of the ground parts.
Taiwan Auto-Design Co.
Product Description :
Polytec 3D Scanning Vibrometers are state-of-the-art
for noise and vibration measurement in research and
development. Using three independent scanning
heads they deliver the full information on all vibrational
directions. The PSV-500-3D determines operational
deflection shapes and Eigenmodes for NVH, acoustics,
structural dynamics, ultrasonics, and FEM validation.
The high frequency version up to 25 MHz extends the
application range to non-destructive evaluation (NDE)
research. Every PSV-500-3D integrates perfectly into the CAE world providing interfaces to 3D geometries,
modal analysis and automation. The scanning heads
based on helium-neon laser allow measurements
even on tiny structures due to their especially small
laser spot.
PSV Scanning Vibrometers are available as
a compact laptop version or as a practical rack-type
workstation.
RAISE PRECISION CO., LTD.
Product Description :
The compact, high-resolution MiniCODERs have proven their value for speed and position acquisition in highly dynamic applications. They use their full potential when installation situations with little space require a particularly compact, robust and reliable measuring system. The magnetic measuring systems consist of a ferromagnetic target wheel and a scanning unit. Without dedicated bearings, they are completely wear-free and maintenance-free. The optimised circuit and screening technique, and fully encapsulated electronics ensure reliable operation even in harsh environments.
KAO MING MACHINERY INDUSTRIAL CO., LTD.
Product Description :
1. 門寬2.1米以下，底座採用雙線軌設計；門寬2.3米以上底座採用三線軌設計，並具有硬軌之高剛性結構，Z軸行程可達850mm。<br />
<br />
2. 三軸均配備大型滾柱式線性導軌；剛性與速度兼顧。<br />
<br />
3. Y軸採用階梯式導軌設計，上軌與下軌段差225mm的特殊設計，使主軸頭不易前傾，同時分擔了部份Y軸失利於立柱的推力，使主軸頭在重切削負荷時，非常穩定；並以垂直方式偏置排列，確保最佳結構剛性。<br />
<br />
4. 主軸以直結式傳動，減少軸不對心引起的振動，提高切削性能與精度。<br />
<br />
5. 最佳主軸頭中心對稱式設計，減少熱變位影響，確保主軸精度。<br />
<br />
6. 利用有限元素分析(FEA)先進實務觀念，設計出最佳化底座立柱及橫樑等主要結構剛性。<br />
<br />
7. 三軸使用高精度並施以預壓及預拉之滾珠導螺桿；X軸採中空設計並通過冷卻油，且螺桿兩端之稱軸承外環，有空氣冷卻之特殊設計，減少熱變形，確保最佳之定位精度。<br />
<br />
8. Z軸油壓平衡配重；在Z軸上使用兩支油壓缸抵消主軸頭重量，確保加工時的穩定性。<br />
TAIWAN INSTRUMENT CO., LTD.
Product Description :
Nikon VMZ-2520 以最先進數位科技所開發出的高效能自動量測系統，具可靠的XYZ軸量測精度以及可被信任的影像量測設備，廣視野達13.3mm，高工作距離73.5mm搭載四象限LED環型燈及上下燈及同軸燈，以及影像或三角雷射自動對焦，對於機械零組件、塑膠射出零件、金屬沖壓件、電子構件、模具與醫療器材等各類產品的 Z 軸尺寸量測更為便利，卓越的量測軟體尋邊演算法，特別在不明顯的表面光上有特別突出的能力，並可選配高度量測模組，同時滿足工業產品多樣的影像觀察需求並可結合機械手臂做產品自動上下料搬運，達成工業自動化設備目標。
GENTIGER MACHINERY INDUSTRIAL CO., LTD.
Product Description :
- “U” shaped base is one-piece fabricated for maximum stability and rigidity.
- X-axis federate is transmitted through a specially designed rotating nut, it prevents the ball-screw runs out during rotating and makes feed motion response faster.
- Coolant inter ball-screws on three-axis prevent ball-screw deformation, it suppresses thermal growth and thermal displacement on the ball-screw while assuring smooth feed motions and high positioning accuracy.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
＊High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
＊Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
＊Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
