Theme
Digital Transformation
Green Transformation
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
RAISE PRECISION CO., LTD.
Product Description :
CAPTRON, pioneer of the first capacitive two-hand control system, ensure the highest safety category according to (Cat. 4) and PL e (DIN EN ISO 13849-1). The capacitive "safeCAP" two-hand control allows heavy machinery and systems in automated production plants, such as presses and punches, to be controlled safely and without pressure.
To start the machine the user simultaneously presses two capacitive buttons which are connected to a safety relay. Incorrect or inattentive control using just one hand or with another part of the body is detected by the system and the machine is not started.
CAPTRON supplies the safeCAP two-hand control with additional safety elements such as the Protector or the control desk for tabletop installation. These combinations enhance protection and are certified to DIN EN 574. The dynamically switching SENSORswitches detect interference factors such as dirt, dust or foreign bodies. The switches can be actuated using disposable or work gloves, however.
TONGTAI MACHINE & TOOL CO., LTD.
Product Description :
‧HTT-500, the 5-axis horizontal machining center, is Tongtai's new solution of process integration which will definitely meet the demands on high-mix low-volume manufacturing.
‧Excellent machine rigidity and stability to ensure high accuracy during precision machining.
‧Orthogonal mechanical coordinate system for easy programming and enhance the precision and efficiency of machining.
‧Central chip removal system effectively prevents the problem of internal temperature rise from accumulated cutting chips and reduces the environmental variables for higher precision.
‧Equipped with APC (auto pallet changer) system to shorten the machine idle time.
‧Built-in thermal compensation function to ensure ideal machining accuracy under different temperature conditions.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
The “ i-Center ” is a trademark of Nine9,
the developer of the first indexable center drill in the world.(Patented)
Offering an indexable insert system for the 1st time, Nine9’s “i-Center ” design improves your process performance. Shortens set up and center drilling time.Increases tool life and reduces tooling costs.
● High Speed, High Feed Rate
• The special ground insert and rigid holder design facilitate high performance speed and feed rates. For example, drilling alloy steel
at 6000 rpm and feed rate of 600 mm/min. (0.1 mm/rev.).
● Excellent Repeatability
• The positioning repeatability of the insert is within 0.02 mm
(.0008”) in radial direction, thus ensuring conformity to any national
standards.
● Easy Tool Length Setting
• The axial position accuracy of the insert is 0.05 mm (.002”). It is
not necessary to reset the tool length when changing or cutting edge.
● Extended Tool Life
• Coolant can be supplied through the center of the holder to increase performance and extend tool life.
• Insert geometry, grades and coating process are specifically engineered for centering applications.
LIS AUTOMATIC CONTROLLED CO., LTD.
Product Description :
PJ-20V0 is a surprising design. In addition to the dead corners of the bar feeder, there are also many spaces that easy to ignore, used by customers to pile up the stuff and lose the value of use. The idea of PJ-20V0 revitalizes these spaces and is no longer limited to 2D imagination, also to evolve to the concept of 3D space. This system provides a powerful and compliant function system for users continuously. Using for continuous variable volume (pressure), saving the electricity cost and the time of the adjusted pressure. Suitable for the Swiss Lathes and gun drilling.
EQP SERIES CO., LTD
Product Description :
任何人都可以輕鬆測量振動。 實現超小型、簡單、實用、快速的測量。
手持式便攜型振動計。
Hi/Lo 靈敏度切換，可以進行較寬範圍之測量
加速度測量範圍為0.01m/s2 至199.9m/s2
速度測量範圍為0.01mm/s 至199.9mm/s
位移測量範圍為0.001 至19.99mm(P-P）
使用兩節 AA 鹼性電池，可連續使用 30 小時以上。
所有附件（如觸針、磁鐵、安裝螺釘和手提箱）均作為標準配置提供。
它符合振動烈度測量設備標準JIS B 0907，能夠確定旋轉機械等的質量。
通過各種擴展選項可以進行振動波形記錄和頻率分析。
符合歐洲CE規範之產品。
