Theme
Digital Transformation
Green Transformation
SONG GIA INDUSTRIAL CO., LTD.
Product Description :
【CROSS DRILLING/MILLING UNIT, 3-SPINDLE】
Speed ratio : 1:1
Maximum speed : 8000RPM
Tool clamping : ER11M
【DRILLING/MILLING UNIT FOR SUB SPINDLE】
Speed ratio : 1:1
Maximum speed : 8000RPM
Tool clamping : ER11
Machine :
33mm : SR-20R : STRB111203
36mm : SB-20R : STBB111201
47mm : SR-32J : STRB111301
DKSH Taiwan Ltd.
Product Description :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
CAPTAIN SCIENCE CORPORATION
Product Description :
GENERAL DESCRIPTION RTB bearings (standabearings consist of a L-shaped inner ring - complet-ed with a washer -, an outer ring, two roller thrust bear-ings and a cylindrical roller bearing, full complement.Unitec has modified the inner design of RTB bearings and therefore load-carrying capacity and stiffness values may differ from the ones of past designs indicated on previous catalogues. The axial and radial load ratings have been calculated according to UNI ISO 76 and UNI ISO 281 standards.
PINTAI MACHINERY CO., LTD.
Product Description :
● NC控制器配合彩色觸控螢幕，機器操控簡易<br />
● 三爪式夾持工件，夾持穩固，進給快速<br />
● 穩重的機體結構，具有最佳研磨穩定性<br />
● X，Y軸自動進給，採用伺服馬達驅動<br />
● 砂輪主軸及工件主軸均可無段變速<br />
● 砂輪主軸轉速50000 rpm<br />
● 高速砂輪主軸轉速，大幅提升加工效率，且研磨面精緻<br />
● 雙V型滑道，經熱處理硬化，滑道面經精密研磨，並貼附Turcite-B耐磨片及鏟花處理<br />
● 附三色警示燈，呈現機台操作狀態
HYPERMAX MACHINERY CO., LTD.
Product Description :
1μ control-setting system and a design of high-rigidity roller rail track enhance the precision of locating axis. Also, JG1 integrates multiple processes, one chucking then inner face, bore and end face, into full grinding processes. Its powerful working capability completes a serial of 8 procedures at one time.
CHIAH CHYUN MACHINERY CO., LTD.
Product Description :
The WTS series combine with double turret, double spindle and double Y axis. Both of 16-station power turrets are available to be equipped of BMT-55 tooling system. The WTS has E-axis shifting function, it allows the sub spindle to move up and down to provide independent working area.
The WTS-52Y2M provide ∅51mm maximum bar feeding dia. and it can install fixed tailstock above the sub spindle when using collet, it allows to keep the longer workpiece dynamic balance with the main spindle and improves precision during machining. The WTS-65Y2M bar capacity up to ∅65mm, the A-6 spindle nose can install larger size chuck and the spindle motor upgrade to higher torque and bigger power.
