Theme
Digital Transformation
Green Transformation
Tokai Spring industries, Inc.
Product Description :
Tokai spring is committed to manufacturing small-lot and custom-made spring orders because we believe that there are customers who need highly specialized, high quality spring products. Tokai spring’s mission is satisfying or even exceeding our customer’s requirements.
Otennlux Lighting Technology Co.,Ltd
Product Description :
Otennlux LED intelligent signal lights use IO-Link interface, flexible and versatile, and
diversified applications, providing reliable control solutions for Industry 4.0 intelligent
automation industry. Reduce wiring, increase data availability, remote configuration and
monitoring, simple equipment replacement and advanced diagnosis, improve process
efficiency and increase machine availability.
GP MACHINERY CO., LTD.
Product Description :
The Hiteco birotary heads series Tilt HX PLUS (90 °) are ideal for light alloys, composite materials and plastics working. Discover the liquid cooled electrospindles available with the various configurations.
Advantages:
1. Designed for machining composite materials, plastic and light alloys
2. Optimisation of the machining times thanks to the high positioning speeds
3. Excellent stiffness despite the light weight
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
TAI CHONG CO., LTD.
Product Description :
用途： 車床，直立式車床，旋轉磨床等工作母機研削。<br />
特性：<br />
本體與面板一體成型加工完成。<br />
以電控操作，快速充脫磁場變換。<br />
以永久磁鐵吸著工件，沒有停電的危險性。<br />
吸磁作業面，螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊，針對變形平面，作平面加工，大量節省調整時間，提高工作效率。<br />
結構剛性佳，配合精度穩定，適合高精度加工作業。<br />
與強力型電磁鐵比較，大幅度節省電力消耗。<br />
防水效果最確實，保證不漏水，不漏電。<br />
平均吸磁力18kgf/cm2以上。
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
TAI WAN C&U INTERNATIONAL TRADE CO.,LTD.
Product Description :
軸承製造業是人本集團的主導產業，其生產的精密低噪音軸承是經國家軸承監督檢驗中心檢測，精度儲備率100%，優等品率100%，Z3組穩定達產率95%，Z4組穩定達率60%以上，在國內同行業處於領先地位，填補了國內空白。人本(C&U)軸承還多次獲中國“精品軸承”稱號。現已形成溫州、杭州、無錫、上海、南充、蕪湖和黃石等七大軸承生產基地，已擁有73家軸承成品和配件製造企業，下屬成員企業146家。集團能生產內徑1.0mm至4000mm範圍內的軸承三萬餘種，在國內同行業中產銷排名第一。
BENIGN ENTERPRISE CO., LTD.
Product Description :
• Heavy duty mill for wide range of applications
• Machine body is made of Meehanite casting.
• 5 HP inverter driven spindle, variable speeds
• X & Y axes automatic feeds driven by 1⁄2HP 12P motor and inverter
• Z axis rapid up-down driven by 1⁄2HP 6P motor.
• ISO 40 spindle, quill diameter 105mm
• Y & Z axes square ways
• Turcite-B coated on X & Y saddle.
• Hardened table and all slide ways.
DEEP JET INDUSTRY CO., LTD.
Product Description :
1.Special cutting-edge design with low resistance to reach better chip-off from the groove. This shows the tool's stability in high speed machining.
2.The special coating enhances the anti-oxidation and wear resistance to increase high speed performance.
◆Carbide Drills With Internal Coolant Holes:
Internal coolant holes can highly increase the performance of cooling and chip removal rate.
◆Carbide Flat Drills:
Good for curve and inclined surface machinning.
