Theme
Digital Transformation
Green Transformation
DKSH Taiwan Ltd.
Product Description :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
YEU-LIAN ELECTRONICS CO., LTD.
Product Description :
We customize CNC Operation Panel matched with FANUC 0i-MD, FANUC 0i-TD CNC system, SIEMENS 828D CNC system PP72/48 and MITSUBISHI M70, M80 and many other CNC control systems. Our operation panel can be flexibly adjusted the design of the machine and offer multi-functional elements such as membrane, acrylic, crystal, laser engrave, silicon protection. Furthermore, customized I/O design to your requirements. In addition to extending the flexibility, it also enhanced the product's quality and endurance.
Go power machinery CO.LTD
Product Description :
Gutian Cam NC Rotary Table internally adopts cam roller transmission mechanism.
There is backlash-free rolling drive between cam and needle bearings pre-load, no sliding
friction or backlash. Its positive reverse motion has high repeatability accuracy, without theneed for periodic calibration and adjustments. This product is featured with high rigidity,heavy load, high efficiency, and its accuracy is not affected by rising temperature.
ADLEE POWERTRONIC CO., LTD.
Product Description :
●Brushless DC Motor
1. Minimize EMI and maintenance free. Low noise.
2. Specialized design to have smooth shaft rotation and improved reliability.
3. Brushless DC motor is light weight and compact size, higher power density, higher torque density and higher efficiency than conventional motors.
4. The structure has an excellent behavior in energy saving during heavy load operation. The high efficiency range is much wider than other motors too.
5. Built-in NTC thermal resistor to prevent over heat problem.
●AC Driver
1. Available for all control interfaces, ex. RS 485, direct signal, PLC, HMI.
2. Convenient 220VAC driver power input from 60W. No more 24VDC power supply.
3. Built-in 24VDC mechanical brake control power.
4. Real motor speed display and signal output.
5. Panel control is always enabled with removed control or terminal control or RS485 control. Convenient for system set up or maintenance.
6. Excellent speed stability. Open loop and close loop speed control for selection.
7. With 0~5VDC, 0~10VDC and 4~20mA speed analog input.
8. Over current / heat / voltage, electric motor lock protection.
BORE AUTOMATION TECH. CO., LTD.
Product Description :
24V DC 16 Channels Relay Module, equipped with high qaulity OMRON G3DZ-DZ02P-DC24 SSR power relay, high quality WAGO PUSH-IN Type PCB terminal block, easy to replace pluggable relays, fully compatible with variety PLC /CNC controller, muti-functional protection , optimized installation effort
YIH KUAN ENT CO., LTD.
Product Description :
1. Semiautomatic processing angle head suitablel in all type of milling heads, can change the processing angle and also bring the powerful and high-quality cutting benefits for machine.
2.This product uses for Japanese gear grinding, so the spindle speed can up to 2000rpm and also can bring the powerful and high-quality cutting benefits for machine.
3. This product offer manual or semiautomatic two type for your optional.
4. This product offer one degree or five degree for your optional.
HAINBUCH GmbH
Product Description :
HAINBUCH segmented mandrels use state-of-the-art clamping technology that is convincing, even in the most critical applications. The central element is the vulcanized segmented clamping bushing. Because conventional clamping bushings are made of spring steel and are only annealed to spring hardness, they are »soft« and they must »bend« to clamp the workpiece. HAINBUCH segmented bushings are made of case-hardened chromium-nickel-steel and have segments that are extremely hard and rigid. All contact surfaces are completely ground in one operation guaranteeing optimum concentricity.
Mandrels with hexagonal clamping geometry, the MAXXOS mandrels. are the optimized version for round MANDO mandrels. Thanks to the hexagonal geometry, a previously unattained clamping force and rigidity with the best precision is now achieved for internal clamping. The robust and powerful clamping mandrel delivers first-class values in terms of dirt density. The force is transmitted by positive locking, in addition to optimum process reliability and long maintenance intervals.