Theme
Digital Transformation
Green Transformation
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
CHIN MING PRECISION TOOLS CO., LTD.
Product Description :
★ For titanium alloy, stainless steel and alloy steel(≦45°HRC) machining.
★ Chattering is decreased dramatically with unequal flute spacing ＆ nonequivalent helix angle, increase processing speed and stability.
★ Circular flute design for better chip disposal, reduces chip packing, release stress and improving rigidity of the tool.
★ Use for roughing cutting, semi finishing, finishing.
HERBERT ENTERPRISE CO., LTD.
Product Description :
The vise has high strength and high precision
By using ductile cast iron, the strength is three times stronger than the vise of the same grade
Newly developed patent, oil-free double force mechanical lifting system, can easily get high clamping force and never depressurize
Compared with the vise of the same level, it has nearly double openings, which can easily overlap and replace the work
The jaws are deeper than the vises of the same grade, which can indeed hold higher workpieces
ADLEE POWERTRONIC CO., LTD.
Product Description :
●Brushless DC Motor
1. Minimize EMI and maintenance free. Low noise.
2. Specialized design to have smooth shaft rotation and improved reliability.
3. Brushless DC motor is light weight and compact size, higher power density, higher torque density and higher efficiency than conventional motors.
4. The structure has an excellent behavior in energy saving during heavy load operation. The high efficiency range is much wider than other motors too.
5. Built-in NTC thermal resistor to prevent over heat problem.
●AC Driver
1. Available for all control interfaces, ex. RS 485, direct signal, PLC, HMI.
2. Convenient 220VAC driver power input from 60W. No more 24VDC power supply.
3. Built-in 24VDC mechanical brake control power.
4. Real motor speed display and signal output.
5. Panel control is always enabled with removed control or terminal control or RS485 control. Convenient for system set up or maintenance.
6. Excellent speed stability. Open loop and close loop speed control for selection.
7. With 0~5VDC, 0~10VDC and 4~20mA speed analog input.
8. Over current / heat / voltage, electric motor lock protection.
HUI BAO ENTERPRISE CO.,LTD
Product Description :
In FRL combination category, Hui Bao provides five categories products which are all essential parts to an efficient air system. The five categories product comprise – Filter、Regulator、Lubricator、Air cleaner / dryer、Auto Drains. In terms of product range for FRL, we have 1/8” ~ 1” port sizes, which can fulfill requirements from the consumer level through industrial applications.
DEEP JET INDUSTRY CO., LTD.
Product Description :
1.With excellent features of coating to increase the tool life and wear resistance performance.
2.With unique geometry to effectively remove fabric residue.
◆Cutter Speialized in Cutting Fiber End Mills:
Patented flute shape/new design.
◆Cutter Specialezed in Cutting Fiber Drills:
Excellent performance in drilling burrs and tearing.
◆ Cutter Specialized in Cutting Fiber Drill End Mills:
Suitable for thru hole machining.
