Theme
Digital Transformation
Green Transformation
HYDROKOMP GmbH
Product Description :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
KAO MING MACHINERY INDUSTRIAL CO., LTD.
Product Description :
1. 門寬2.1米以下，底座採用雙線軌設計；門寬2.3米以上底座採用三線軌設計，並具有硬軌之高剛性結構，Z軸行程可達850mm。<br />
<br />
2. 三軸均配備大型滾柱式線性導軌；剛性與速度兼顧。<br />
<br />
3. Y軸採用階梯式導軌設計，上軌與下軌段差225mm的特殊設計，使主軸頭不易前傾，同時分擔了部份Y軸失利於立柱的推力，使主軸頭在重切削負荷時，非常穩定；並以垂直方式偏置排列，確保最佳結構剛性。<br />
<br />
4. 主軸以直結式傳動，減少軸不對心引起的振動，提高切削性能與精度。<br />
<br />
5. 最佳主軸頭中心對稱式設計，減少熱變位影響，確保主軸精度。<br />
<br />
6. 利用有限元素分析(FEA)先進實務觀念，設計出最佳化底座立柱及橫樑等主要結構剛性。<br />
<br />
7. 三軸使用高精度並施以預壓及預拉之滾珠導螺桿；X軸採中空設計並通過冷卻油，且螺桿兩端之稱軸承外環，有空氣冷卻之特殊設計，減少熱變形，確保最佳之定位精度。<br />
<br />
8. Z軸油壓平衡配重；在Z軸上使用兩支油壓缸抵消主軸頭重量，確保加工時的穩定性。<br />
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
LIS AUTOMATIC CONTROLLED CO., LTD.
Product Description :
PJ-30MT is a fixed volume complex system. Controlled by the modular PCB board, provided the abnormal message notification of the system effectively. Suitable for using the fixed volume machines, such as CNC lathes, machine centers. This system integrates great advice from our countless loyal customers, and also LIS gain experiences in a broad of customers’ base developed a high-pressure coolant system for most industries when customers use the PJ system, it is more humane, easy to install, operate and maintain. Without a doubt, this is just a product of LIS which combine the suggestion from multiple parties.
Hantop Intelligence Technology
Product Description :
Tool Holder Spec. provided:
BT30, BT40, HSKA63, HSKE25, HSKE32, HSKE40, CAT40
1. High Speed, high efficiency ultrasonic machining solution for high precision advanced materials machining(can reach 38000 rpm)
2. Plug and Play design for convenient and flexible Installation
3. Effective Intelligent Tracking System for advanced materials machining, finding the suitable resonance between tools and modules
4. Non-Contact transmission Design doesn't limit the high spindle rotation and reduce the impact from cutting heat, enhancing tool life and quality to next level.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
SGCAM TECHNOLOGY CO., LTD.
Product Description :
主功能介紹：<br />
全中文畫面，易學、易懂、易用，為加工業最適合的加工軟體，操作軟體完全不用背指令。<br />
可由AutoCAD製圖畫出工件外形，再匯入DXF圖檔，轉換為CNC程式碼。<br />
參數式的加工資料設定，作CAM只需三個步驟：（1）選擇工法（2）指定加工參數（3）計算、轉出加工G碼。<br />
參數式的資料設定，圖形改變後，加工碼會自動隨之改變。<br />
智慧型功能：<br />
工法和加工的輪廓可直接複製修改，不必再重新指定。<br />
自動清角可自動清除前一把刀具，所留下來的角落殘料。<br />
鑽孔時依據孔徑大小，自動搜尋鑽孔的加工位置，不必每一孔都去點選指定。<br />
字型可自動截割輪廓外圍不用慢慢編修。<br />
支援單筆劃字型刻字。<br />
加工路徑最佳化，各加工路徑間依最短距離自動計算，且可指定各加工路徑間不提刀以縮短加工時間，達到最佳之加工效率。<br />
立體加工： 不必畫3D曲面圖形就可做出立體加工工法，簡單夾治具可自行製作。<br />
牽引面加工：可加工彎管、簡單的立體。<br />
規則面加工：規則斜面、四角錐面、圓錐面。<br />
旋轉面加工：圓球面、葫蘆形狀。<br />
Z軸投影加工：可在不等高的平面上作投影加工。
