Theme
Digital Transformation
Green Transformation
Dah Young Vacuum Equipment Co., Ltd.
Product Description :
High Power Impulse Magnetron Sputtering (HiPIMS) is a high-power pulsed power supply system used on magnetron sputtering coating technics. Compared to the traditional DC sputtering system, HiPIMS could generate tens of times higher pulsing current to obtain a ten thousand times higher-density electron plasma. Effectively enhancing the ionization rate to obtain a non-porous, high density crystallinity film at lower coating temperatures.
DAH YOUNG's DYHC HiPIMS series sputtering coater power supply and chamber cavity are designed to provide high plasma density (1018~19e-/m3) and high ionization rate (70~100%), increasing the substrate coating compactness, adhesion flatness and corrosion resistance. The lower duty cycle (<5%) results in a significant reduction in process temperature offering more substrate options on PEN, PET, etc. fiexible substrates.
Please refer to:https://zh-tw.dahyoung.com/
HC FENG CO., LTD.
Product Description :
FOODIE (Chip/Sludge Removal Machine) works for :
Filtration/Removal of excess components
Chip/Sludge Removal
Fine Chip Removal
No downtime
No consumables
Backwater automatically & simultaneously
Air pressure drive w/o a plug
Vertically fast filter drying up to 90% efficiency
Precision filters effective up 20% for super filtration micro-fines
Easy to move
Filter accuracy can be adjusted
Extend cutting fluid life
ECHAINTOOL PRECISION CO., LTD.
Product Description :
"鎢鋼鑽頭為益詮2020年全新上市主力產品,採用國外進口五軸刀具研磨機生產製造,研磨尺寸精準且穩定,提供高品質鎢鋼鑽頭服務。
產品特色:
(1)鎢鋼刀體為含鈷量12%超微粒硬質合金,高剛性耐磨耗耐高溫,可以加工切削HRC<55°工件(2)鑽尖結構加強優化設計,提升切削排屑性能(3)獨特雙刃帶設計,提升加工穩定性,可增加切削加工使用時間(4)全新AlTin鍍鈦塗層,泛用性廣可適用:合金鋼、不鏽鋼、鑄鐵加工。
益詮精密專業製造:(1)捨棄式車刀:新增中心出水外徑車刀架和中心出水內徑車刀架(2)捨棄式铣刀:新增捨棄式粗铣刀、捨棄式T形槽铣刀(3)捨棄式刀片:整合各式車刀片及铣刀片新材質開發(4)鎢鋼端铣刀:新增鎢鋼鑽頭,極小徑鎢鋼一體式車刀,開發新鎢鋼圓棒及特殊研磨刃口端铣刀。
為因應廣大市場需求,益詮精密持續開發精進新增所有刀具品項,不斷努力提升產品品質和服務,秉持初衷努力不懈進步成長,生產製造以最高品質要求,期盼能成為台灣製造業的後盾。"
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
SUNG YANG MACHINERY CORPORATION
Product Description :
SAN YUAN Monorail Low Headroom wire rope hoist
●Hoisting Brake – disc brake having the braking torque >150%rated torque of motor .
●The brake is holden even if power failure - ensuring the load isalways stopped when the control button is released.
●Gears are smoothly operated for an oil bath lubrication and superior to a wear and abrasion resistance.
●Fine machining of the drum grooves minimizes wear on the rope, the return sheaves are resistance to wear.
LNC TECHNOLOGY CO., LTD.
Product Description :
‧Pulse or Digital communication type
‧ EtherCAT protocol provides high flexibility of peripheral equipment connection control
‧6 path 32 axis control (max.)
‧High-speed and high-precision compensation to meet advanced turning and milling applications
‧Dual system, double feedback
‧Provide secondary development tools: HMI/PLC/Macro
‧Equipped with LNC smart vibration sensor to provide value-added functions: abnormal vibration detection, tool wear detection...and so on
‧Applications: high-speed lathe, turning-milling complex machine, dual-system lathe, double feedback lathe, gear hobbing machine
JIMMORE INTERNATIONAL CORP.
Product Description :
迎接工業4.0<br />
<br />
量測刀具只是個開始。ZOLLER刀具設定量測儀可與生產的每一站,無縫的交換刀具資<br />
料,從工作準備到CNC的加工機中,都能獲得一致、精度μm級的刀具數據。這是網路<br />
化製造關鍵性的一步,您可輕鬆的使用ZOLLER»venturion«。<br />
ZOLLER刀具量測儀最特別的地方,就是不管是哪種品牌的加工機,它都可安全的傳輸<br />
刀具資料到每個控制器中。資料傳輸的方式可分為刀具黏標、RFID晶片卡、後處理程<br />
式、刀具二維條碼、或高級生產控制系統。不論未來需要與何種新系統合併,ZOLLER<br />
都可迎刃而解!<br />