Theme
Digital Transformation
Green Transformation
HONG JI PRECISION MACHINERY LTD.
Product Description :
Drilling capacity is from Ø5mm to Ø40mm and the max. drilling length is 3000mm
The machine is suitable for drilling accessories of petroleum system, tube holes of heat-exchangers, long mechanical sleeves and long aerospace parts.
Slideways of all axis are harden box ways with heat-treatment to HRC52, this design has good damping to absorb vibration as drilling big and long holes.
The worktable is loaded on the harden box slideways with width 200mm. The max. loading weight on the worktable is 20tons.
The width of column is 2 meters with two sub-columns to provide the excellent support to Y-axis as moving up and down. Total weight of the machine is about 38tons.
CHING HSYANG MACHINERY INDUSTRY CO., LTD
Product Description :
1.A circular tube modifies an interior angle and an external angle at one time with fastness and precision.
2. It's simple and fast to switch the knife because of easy to buy the insert disc in the market.
3. Two-stage of feeding knife, and the idle stroke is smooth. It's available for adjusting the operation stroke according to the cutting volume.
4. There are automatic and manual functions, which are convenient for adjusting the machine.
5. Special automatic positioning device, which can automatically position, feed and chamfer, and fine-tune the length tolerance.
6. Oil mist cooling and lubricating system promotes insert life, and no chips will stay.
7. There is a pause switch at the final point so as to assure the flat plane and the accurate right angle of the work piece.
8. The axle head with phosphor & copper bushing can prolong the life.
9. It can be option the lifting rack to use with this machine.
DKSH Taiwan Ltd.
Product Description :
PC F series is designed to produce maximum distillate quality with minimum capital and operating costs. Each model is a compact skid-mounted unit, simple, safe and easy to move. Control is by a PLC, including the functions of feed and discharge, therefore allowing automatic operation and minimum supervision. All models are designed for continuous operation, 24h/day, and require just electrical supply and compressed air.
PC F series evaporators operate in a high vacuum condition, with the boiling chamber pressure set at 5-6 kPa (absolute vacuum), in order to save the thermal energy produced by the heat pump. In this way the boiling temperature of the wastewater is approximately 40°C (104°F) and typical phenomena (scaling, precipitation, corrosion) which may reduce the performance are either eliminated or considerably reduced.
From 0,7 to 24 m3/day – 0.13 – 4.4 US gpm of distillate
Dramatic reduction of volumes and disposal costs
Water reuse and matter recovery
YING HAN TECHNOLOGY CO., LTD.
Product Description :
■The specially designed software allows the operator to design the desired graphs on characters with ease, then machining can be conducted immediately.
■By using CAD/CAM software, material can be fully utilized for saving materail cost.
■The automatic height adjustment function enables the focal length to be maintained at a constant status, thus ensuring the consistency of cutting quality.
■3D tilt cutting function (optional) allows multiple tubes to join precisely. The function is also applied for beveled edges welding.
■Small heating area on the workpiece eliminates workpiece deformation problems.
■This machine is equipped with a constant temperature water chiller, enabling the machine to withstand long time continuous running with stable performance.
■The enclosed splash guard can prevent damage to personnel due to the strong laser light.
ENSINGER ASIA HOLDING PTE. LTD. TAIWAN BRANCH
Product Description :
TECAPEI natural (PEI) is an unreinforced polyetherimide, suitable for contact with foods, that exhibits high mechanical strength and rigidity. The characteristic profile includes very good hydrolysis resistance, and dimensional stability, combined with a relatively high long term service temperature.
WELE MECHATRONIC CO., LTD.
Product Description :
1.立車主軸轉盤以進口交叉滾子軸承設計，確保重負荷的能力及長期的精度壽命。
2. Z軸226 mm方型滑枕搪孔軸採硬軌配Turcite B結構，VTC1612-CW標準行程900mm。
3.底座、立柱、橫樑、工作台等大型鑄件依製造需要，經由最新的3D設計，剛性最佳化，並以
多年經驗訂定有效的退火程序以消除殘餘應力，多年實際應用經驗，確實能達成有效的長期精
度保持性。
4.X、Z軸標準配備採用「雙編碼器」的「雙」半閉環回饋系統，經濟有效的提高各軸的定位精度。
(X、Z軸可選購德國Heidenhain或西班牙FAGOR光學尺)。
5.VTC-CW標準刀庫容量為16P(16儲位)，車刀型式及分配數目可依客戶要求處理。
6.主軸箱等關鍵零件係利用自有的「大型臥式鏜孔機」及「大型高精度三次元量測儀(三座標量床)」
確實達成應有的加工精度，確保優良的組裝基礎。
7.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密
精度的基礎，對各項關鍵零件進行精密鏟花(刮研)，使機器的各處結合面和滑動面均能達到正確的
幾何精度，確保機器應有的精度和壽命。
8.搭配高規格的Fanuc數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、
2MB記憶容量、Ethernet網路接口、Flash記憶卡插口、剛性攻牙及各種特殊補間(插補)等多項
高規格功能，能經濟有效的滿足各種使用需求。
9.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
10.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等
精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
11.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
12.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
WELE MECHATRONIC CO., LTD.
Product Description :
1.高剛性高穩定性結構
A. 底座：機器底座採用整體式鑄件，有效確保機器剛性。Z底座採4線軌設計，全行程範圍內直接落地支持，有絕佳的剛性及穩定性，確保整體長期幾何精度。
B. 滑座：滑座採用整體式鑄件，支撐於Z底座上，4線軌設計增加滑座負載剛性。
C. 立柱：立柱採用整體式鑄件，有效確保機器剛性；且固定不移動，大大減少主軸移動行程中所帶來的幾何精度誤差影響。
2. XYZ三軸及W軸導軌均採用先進的超重負荷型「滾柱」線性導軌，大幅度提高導軌「剛性」和「重切削能力」，也繼續保有「低摩擦力、低磨耗、低遲滯現象、低失位量、高速度、高精度、高動態特性、高壽命、不需調整」等線性導軌的優良特性。
3.XYZW四軸的均有過負載保護，如因誤操作造成撞機，可有效降低對機器的損傷。
4.雙編碼器回饋裝置（配置於XYZ三個進給軸)，B軸採用(圓光栅-角度編碼器) 廠牌：發格Fagor。
5.主軸箱等關鍵零件係利用「大型臥式搪孔機」及「大型高精度三次元量測儀（三座標量床）」確實達成應有的加工精度，確保優良的組裝基礎。
6.鞍頭：110主軸系統配備搪孔軸直徑110mm，搪孔軸行程W=500mm、3500 rpm(兩檔齒輪箱)。搪孔軸為氮化處理高硬度合金鋼件，前段支持使用傳統的硬化襯套外，後段附加線性導軌的加強支持，借助滾動低磨耗的特性，增長搪孔軸的精度壽命。
7.主軸前軸承採用直徑150mm的高精度主軸軸承，加上改良設計的軸承配置及潤滑設計，有效的提高主軸剛性和壽命。
8.主軸鬆刀採浮動式抓鬆刀裝置，鬆刀時不會施力於主軸軸承上，可長保主軸最佳精度；另，新式鬆刀缸配置設計，可使主軸於任一行程(W軸)位置換刀。
9.特殊設計的自動潤滑系統；潤滑油與切削液分開， 單獨收集可確保切削液的穩定性及工作環境的清潔。
10.刀庫採立柱側背式設計；刀庫與立柱接合，不同於落地型式，立柱固定不移動，刀庫與鞍頭配置可達成左右平衡架構，提高W軸動態穩定特性。
11.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密度的基礎，對各項關鍵零件進行精密鏟花（刮研），使機器的各處結合面和滑動面均能達到正確的幾何精度，確保機器應有的精度和壽命。
12.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
13.電氣箱採全密閉式循環熱交換系統，內部配線均參考德國工業安全標準，電源部份與訊號線區隔，以增加機器使用上的安全。
14.搭配高規格的Fanuc 0i MF Plus數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、1280米記憶容量、Ethernet網路接口、Flash記憶卡插口、Manual Guide i圖形對話式編程、剛性攻牙、手動剛性攻牙、AI contour control II等多項高規格功能，能經濟有效的滿足各種使用需求。
15.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
16.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
17.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
COMETECH TESTING MACHINES CO., LTD.
Product Description :
RS-485
型號：K0118-000F51A2
通訊速度：9600、19200、38400、115200、921600、1M、2M bps
連接器型式：2P歐式端子
尺寸：38 x 31 x 15 mm
使用環境溫度：0°C~55°C
RS-232
型號：K0118-000F41A2
通訊速度：9600、19200、38400、115200 bps
連接器型式：D-Sub 9P母座
尺寸：33 x 31 x 15mm
使用環境溫度：0°C~55°C
CAN Bus
型號：K0118-000F61A2
通訊速度：1M bps
連接器型式：2P歐式端子
尺寸：38 x 31 x 15 mm
使用環境溫度：0°C~55°C
JIN TAIRY ELECTRIC CO., LTD.
Product Description :
Product Features Attached micro pressure gauge (can monitor the life of the filter barrel)
• Low power, high performance
• Low noise, environmental protection and energy saving
• Unique design, easy maintenance
• Motor temperature protection
• Small size and easy installation
• Economical and practical
• Modular design, easier to repair and maintain
• Fully intelligent design, automatic detection of abnormal warning and overload protection "optional"
• Oil mist deflector, which effectively intercepts oil mist and prolongs the service life of the filter barrel "optional"
DEEP JET INDUSTRY CO., LTD.
Product Description :
1. The drill reamer is designed with a positioning function.
2. Improve processing stability and provide excellent performance in support and roundness.
◆Carbide drills with coolant holes - designed with central coolant holes. It has both rigidity and lubrication effects.
