Theme
Digital Transformation
Green Transformation
LEADWELL CNC MACHINES MFG., CORP.
Product Description :
Spindle nose A2-6 with 8” inch chuck for both spindles. The bar capacity of the main spindle is up to 52mm. Spindle uses high-power built-in motor with a maximum torque of 292Nm which for heavy cutting and surface milling operations. The capacity of the Y axis is ±50mm, which allow offset processing and increase the speed of milling.
Max. swing: 790mm
Max. turning diameter: 300mm
Max. turning length: 770mm
Bar capacity: 52mm
X1-axis travel: 235+15mm
X2-axis travel: 220+10mm
Z1-axis travel: 770mm
Z2-axis travel: 790mm
B-axis travel: 770mm
Y-axis travel: ±50mm
Spindle speed(Main/Sub): 4500rpm
Spindle nose(Main/Sub): A2-6
Spindle motor power(Main/Sub): 25kw
Number of tool stations: 16T
COMETECH TESTING MACHINES CO., LTD.
Product Description :
※Specification
-Power Supply： DC 24V
-Sensor Input： Two-wire Empire T.C. (4 sets)
-Control Output： SSR (4 sets)
-Communication Interface： Built-in Wi-Fi module and RS-485; RS-232, CAN Bus for options
-Accuracy：± 0.25% F.S. or ± 1.0℃
-Control Method：4-PID Control
-I/O(photocoupler)：4 Inputs, 4 Outputs (Open Collector)
-Heater Element Burnout Detect：4 Sets for options
-Display： 2.8" wireless color touch screen for options
-Software： Equipped with dedicated temperature monitoring software which is available to connect with mobile devices (smartphone, pad, notebook, etc.) through Wi-Fi.
※Features
-Compact structure to save installation spaces
-Up to 4 heating and 4 temperature detection channels
-Data setting and devices' status monitoring by dedicated software through Wi-Fi connection
-Over-the-air firmware update
-Heater element burnout detection for easier maintenance
-Modbus-compatible driver for various host controller
-Multiple I/O (open collector) for flexible expansion of different applications
HABOR PRECISION INC.
Product Description :
HABOR_ HIG DC Inverter Cooler_ High energy-saving X Low-carbon emission
Upgraded with new generation refrigerant_ R513A which is Low-GWP to reduce the warming influence, Habor HIG series is the best partner for green machine tools.
Habor HIG series is a DC inverter cooler integrated technologies of smart IoT, energy-saving, high-accuracy control, equipped with Ethernet Communication protocol for remote setting and real time monitoring, intelligent management of predictive maintenance and status detection.
Thanks to speed control and frequency conversion technology, HIG series can save energy cost up to 60%. In 2024, we announced new coolers which uses LOW-GWP refrigerant R513A on the base of use less refrigerant system to reduce carbon emission up to 70% .
Habor provides wide range of high precision temperature control system to machining process, such like cooling for spindles, coolant, linear motors, ball screw, gear box, hydraulic systems….etc.
Going forward Net Zero by 2050, except DC inverter cooler unit, Habor also provides various solutions to help users to save cost of factory electrical consumption. For more information, you are welcome to our booth in TMTS2024.
Habor Booth No. P0114, 1F Hall 2
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
Ametek Taiwan Corp., Ltd.
Product Description :
Autocollimator：The autocollimator is used for measuring angle, straightness, flatness, squareness and parallelism.
MAT：The micro alignment telescope is used for alignment inspection and adjustment in machine tool and ship industries.
Talyvel：The Talyvel electronic level is used for measurement and adjustment, such as: straightness of machine tool guideway, flatness of granite platform.
Clinometer：Precision in angular measurement, checking and setting with 360° range.
Prism Checker：Automatic Prism/Polygon measurement system.
MATECH INDUSTRIAL CO., LTD.
Product Description :
本數控橢圓車床係為解決汽油機與柴油機活塞的中凸變橢圓裙部之加工而設計的。
本機特性
*本數控橢圓車床採用線性伺服橢圓產生器，配合非接觸式0.0001mm超高解析度
回饋系統，具備高響應頻率、高精密度、高剛性等特點。
*由於此設備採用高效能控制核心及極短取樣時間的新一代控制器，可以獲得更快速
且精準的切銷路徑控制。
*本機部份採用全閉環式0.001mm光學尺回饋系統，近一部確保最家定位精度，並能
有效的消除熱干擾。
*新一代整合式橢圓控制器，由於不在需要資料傳輸，因此可以避免因為傳輸而導致的
雜訊干擾或資料遺失。
*編程軟體採用(看圖輸入法)編寫，操作者無須再耗費長時間學習，只要依照活塞圖面
標示的尺寸，輸入安加橢圓控制器即可，型線及相關橢圓路徑則全由控制器處理。
CHUAN TAI HYDRAULIC MACHINERY CO., LTD.
Product Description :
In order to solve the problem of difficult cleaning, the market developed so-called box-shaped filters, but still can not completely solve
1 takes up too much space
2 Multiple pump combination systems must be configured one-to-one, resulting in too many connectorsProne to oil leakage
In order to solve the above problems, the company has developed a pair of two-box external magnetic flange filters to reduce space and prevent oil leakage problems, reduce assembly time and parts costs
