Theme
Digital Transformation
Green Transformation
SCN MACHINERY CO., LTD
Product Description :
深絞(深抽)成型油壓機 - SYT series<br />
<br />
Tonnage: 100 - 3000 ton<br />
Bolster Area: 800 x 700 - 4500 x 3000 mm<br />
<br />
SYT 深絞成型機 - 機身採用高張力,中鋼一級鋼板,頂座,底座,形成門型機架精加工.90°導軌八面滑合設計,滑塊上下運動,導向性好,精度好,強度高,滑合面自潤銅襯材質,導軌高週波硬化,研磨加工,永保精度不變.<br />
油壓動力系統,設計於機台後方採用管路板式集積回路設計,並附冷卻系統,效率能完全發揮,保養簡潔。<br />
油溫超過設定55度,馬達自動停止運轉,並發出警報聲,提醒操作者冷卻水異常,確保油封使用壽命<br />
配備獨立式操作控面板,吋動,下降.慢速加壓.快速上昇.等操作按鈕,前方附有緊急停止按鈕,操作容易安全,由壓力表設定出力大小、行程位置調整於微動開關設定。<br />
<br />
符合ISO9001:2015認證
WELE MECHATRONIC CO., LTD.
Product Description :
1.立車主軸轉盤以進口交叉滾子軸承設計,確保重負荷的能力及長期的精度壽命。
2. Z軸226 mm方型滑枕搪孔軸採硬軌配Turcite B結構,VTC1612-CW標準行程900mm。
3.底座、立柱、橫樑、工作台等大型鑄件依製造需要,經由最新的3D設計,剛性最佳化,並以
多年經驗訂定有效的退火程序以消除殘餘應力,多年實際應用經驗,確實能達成有效的長期精
度保持性。
4.X、Z軸標準配備採用「雙編碼器」的「雙」半閉環回饋系統,經濟有效的提高各軸的定位精度。
(X、Z軸可選購德國Heidenhain或西班牙FAGOR光學尺)。
5.VTC-CW標準刀庫容量為16P(16儲位),車刀型式及分配數目可依客戶要求處理。
6.主軸箱等關鍵零件係利用自有的「大型臥式鏜孔機」及「大型高精度三次元量測儀(三座標量床)」
確實達成應有的加工精度,確保優良的組裝基礎。
7.承襲歐美先進工具機廠的標準,以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密
精度的基礎,對各項關鍵零件進行精密鏟花(刮研),使機器的各處結合面和滑動面均能達到正確的
幾何精度,確保機器應有的精度和壽命。
8.搭配高規格的Fanuc數控系統,標準功能包含:15吋彩色液晶螢幕、Fanuc全鍵式操作面板、
2MB記憶容量、Ethernet網路接口、Flash記憶卡插口、剛性攻牙及各種特殊補間(插補)等多項
高規格功能,能經濟有效的滿足各種使用需求。
9.採用的各項配套零組件均經過長期使用驗證,可確保機器長期運行的可靠性。
10.完整的品檢測試流程,搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等
精密檢測儀器,確保出廠的機器都能達到設計的性能和應有的功能。
11.經驗豐富的研發團隊,突破老舊的包袱,協助客戶達成各種特殊需求。
12.兼具經驗和熱誠的服務團隊和完整的服務體系,可以及時有效的讓用戶的機器長保最佳使用狀態。
PRECISION MOTION INDUSTRIES, INC.
Product Description :
●Equipped with lubrication unit G1, it can reduce the amount of oil used to meet the economic and environmental protection needs in response the carbon reduction trend.
●In required clean environment where it is necessary to avoid oil scattering, and also prevent to temperature rise caused by injecting too much oil.
●Contains more than 70% oil and can run more than 20,000km without oil supply, also easy to supply oil in difficult filling places and saving a lot of maintenance time.
●Even in an environment with water, there is no need to worry about oil and grease being washed by water.
●The extra lubrication unit equals an extra layer of scraping effect, which greatly reduces the chance of foreign matter invasion.
KTR TAIWAN LTD.
Product Description :
The recently developed DATAFLEX® 16 is available for measuring torque ranges of 10 Nm, 30 Nm and 50 Nm. The torque is measured using the well-approved technology of wire strain gauges combined with the latest electronic components.
The torque signals are processed without contact at a high resolution of 24 bit achieving an accuracy of 0.1 % of the terminal value. Supplementary to torque measuring the size 16 has a speed encoder providing two signals with a resolution of 360 pulses per revolution.