Theme
Digital Transformation
Green Transformation
MAHO ENTERPRISE CO., LTD.
Product Description :
Electric tapping machine is suitable for different size taps (from M3 to M24). The machine is equipped with brushless DC motor and driver for controlling the spindle to tap. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
Taiwan Auto-Design Co.
Product Description :
// SolidMEN-300的優點
✅ 材料: 不綁材料僅建議合格廠商,未來可自行選用適合材料
✨ 雷射: 德國 500W 水冷式雷射穩定性佳
⚡ 層厚: 層厚可控範圍 10~100μm (最小進給單位 10μm)
🛠️ 成品: 可列印多種金屬材料,強度超過鑄造,可作為表面後處理及拋光使用
🔬 研發: 不綁參數開放製程研究,未來材料無受限可自行開發
⬆️ 尺寸: 300x300x300 可製作大尺寸工件,另有機型可增大或縮小
💎 緻密度>99.5%,品質優於鑄造,近似鍛造
🤖 搭配遠端資訊與智能化視覺模組,方便製程穩定性及智慧化整合。
(即時錄影、列印層數/高度、雷射功率、粉未剩餘量、腔體含氧量、製程時間等)
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
LEPAO ELECTRICITY MACHINERY CO., LTD.
Product Description :
Features
Double servo system, close-loop control , precision transmission, accurate in location
There are 6 combination of working coordinates in the system, it is convenient to design
programs and process workpiece
Showing location immediately, self-diagnostics and indicating error function
Providing with Start, Stop, manual fine-tuning, returning origin when it finished,
convenient to operate
Editing and modifying working program on controller
Chinese/ English switch , easy to operate
Supporting memory card, or USB to load files
The program can make by CAD/ CAM
Previewing route of working program
Control axis X , Y 6 axis maximum
Collocating with Pipe cutting, driller
8 inches LCD, a concise panel
Can install「Dust Collector 」
EANG LIAN CORPORATION
Product Description :
Professional Abrasive Brushes-Specifically designed for mechanical finishing tasks .
Specifically designed for mechanical finishing tasks .
That can be used in both conditions: dry grinding or wet grinding;
ideal for deburring parts in which the burred edges are in the same plane. Such as: deburring, sharp edge removal, radiusing,
edge contouring, de-fuzzing .
SPINTECH PRECISION MACHINERY CO., LTD.
Product Description :
●To meet the demand of processing hard and brittle material, toughness material, and dead soft material.
●To provide the cutting line speed for the tool of micro machining to increase high yield rate of processing.
●Can be used on the existing machine equipment for current machine tool equipment manufacturers.
●To conform the processing needs between traditional milling and ultrasonic.
TAIWAN 3AXLE TECHNOLOGY CO., LTD
Product Description :
. Processing size: 1300*900mm.
. Metal cutting configuration with Raycus fiber laser, laser wattage 1000W
. Non-metal cutting configuration 320W Co2 laser tube + professional thick plate cutting head
. Professional cutting system, "one-key switch button" on the machine, can easily switch between metal cutting function and non-metal cutting function.
. This equipment is specially designed for cutting a variety of materials, whether metallic or non-metallic.
. We combine the top-standard Co2 non-metal laser cutting machine configuration with the most popular fiber laser cutting configuration currently used in one machine
. Metal cutting head, 10mm focus Z axis direction adjustment, wide cutting range; excellent and stable beam quality, perfect water-cooled structure, advanced dustproof design, effectively avoid dust intrusion.
. Co2 non-metallic laser cutting performance can perform acrylic cutting with a thickness of 30mm. Because the laser head of this model is specially designed, it shows a bright clean surface without ripples after the acrylic cutting of thick plates.
. Optical fiber laser metal cutting performance Stainless steel can be perfectly cut to 3mm without post-processing. For carbon steel, it can also be cut to a degree of 6~8mm. It is the same grade for professional cutting applications.
MAHO ENTERPRISE CO., LTD.
Product Description :
Pneumatic tapping machine is suitable for different size taps (from M2 to M27). The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
JAR HON MACHINERY CO., LTD.
Product Description :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic machine so a person can operate many machines.
3.Gear-pitch type auto. tapping will get a precise & accurate thread for finished workpiece.
4.It can option to add inverter or use servo motor to control the spindle speed.
4. Especially suitable for light workpiece.
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
PRODUCT FEATURES
FM-35DL Comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding. Once feeding becomes difficult while making a hole, please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
FM-35DL Comes with two intermittent breaking rates for breaking chips:
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation. This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit.
Easier to discharge chips.
The machine body is with height adjustment. It’s suitable for both lone and short annular cutters as well as general chuck which is for holding drill with straight handle.
The general chuck is applicable for holding drill which is with straight handle for drilling smaller holes(from 8-13mm).
