Theme
Digital Transformation
Green Transformation
YATAGHAN ENTERPRISE CO., LTD.
Product Description :
Cristone Crystal Fiber Stones are made from the high quality chemically produced crystal fibers.The crystalline structure offers high polishing efficiency, optimal surface finishes and tremendous bending strength. Cristone is 2 times stronger than normal fiber stones. Perfect stones for detail polishing. Extremely strong for tight ribs and slots. Excellent performance on EDM removal.
They can be used in Ultrasonic Polishers and Air tools.
XIN GONG YANG MACHINERY CO., LTD.
Product Description :
◎Types: 12.5HP x 4P ;15HP x 4P
◎Designed for machine tools, including CNC heavy-duty double-column milling machines, dedicated machinery etc.
Hantop Intelligence Technology
Product Description :
Tool Holder Spec. provided:
BT30, BT40, HSKA63, HSKE25, HSKE32, HSKE40, CAT40
1. High Speed, high efficiency ultrasonic machining solution for high precision advanced materials machining(can reach 38000 rpm)
2. Plug and Play design for convenient and flexible Installation
3. Effective Intelligent Tracking System for advanced materials machining, finding the suitable resonance between tools and modules
4. Non-Contact transmission Design doesn't limit the high spindle rotation and reduce the impact from cutting heat, enhancing tool life and quality to next level.
Taiwan Auto-Design Co.
Product Description :
// SolidMEN-300的優點
✅ 材料: 不綁材料僅建議合格廠商,未來可自行選用適合材料
✨ 雷射: 德國 500W 水冷式雷射穩定性佳
⚡ 層厚: 層厚可控範圍 10~100μm (最小進給單位 10μm)
🛠️ 成品: 可列印多種金屬材料,強度超過鑄造,可作為表面後處理及拋光使用
🔬 研發: 不綁參數開放製程研究,未來材料無受限可自行開發
⬆️ 尺寸: 300x300x300 可製作大尺寸工件,另有機型可增大或縮小
💎 緻密度>99.5%,品質優於鑄造,近似鍛造
🤖 搭配遠端資訊與智能化視覺模組,方便製程穩定性及智慧化整合。
(即時錄影、列印層數/高度、雷射功率、粉未剩餘量、腔體含氧量、製程時間等)
JAR HON MACHINERY CO., LTD.
Product Description :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic machine so a person can operate many machines.
3.Gear-pitch type auto. tapping will get a precise & accurate thread for finished workpiece.
4.It can option to add inverter or use servo motor to control the spindle speed.
4. Especially suitable for light workpiece.
Dah Young Vacuum Equipment Co., Ltd.
Product Description :
High Power Impulse Magnetron Sputtering (HiPIMS) is a high-power pulsed power supply system used on magnetron sputtering coating technics. Compared to the traditional DC sputtering system, HiPIMS could generate tens of times higher pulsing current to obtain a ten thousand times higher-density electron plasma. Effectively enhancing the ionization rate to obtain a non-porous, high density crystallinity film at lower coating temperatures.
DAH YOUNG's DYHC HiPIMS series sputtering coater power supply and chamber cavity are designed to provide high plasma density (1018~19e-/m3) and high ionization rate (70~100%), increasing the substrate coating compactness, adhesion flatness and corrosion resistance. The lower duty cycle (<5%) results in a significant reduction in process temperature offering more substrate options on PEN, PET, etc. fiexible substrates.
Please refer to：https://zh-tw.dahyoung.com/
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
PRODUCT FEATURES
FM-35DL Comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding. Once feeding becomes difficult while making a hole, please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
FM-35DL Comes with two intermittent breaking rates for breaking chips:
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation. This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit.
Easier to discharge chips.
The machine body is with height adjustment. It’s suitable for both lone and short annular cutters as well as general chuck which is for holding drill with straight handle.
The general chuck is applicable for holding drill which is with straight handle for drilling smaller holes(from 8-13mm).
YIH KUAN ENT CO., LTD.
Product Description :
1. Semiautomatic processing angle head suitablel in all type of milling heads, can change the processing angle and also bring the powerful and high-quality cutting benefits for machine.
2.This product uses for Japanese gear grinding, so the spindle speed can up to 2000rpm and also can bring the powerful and high-quality cutting benefits for machine.
3. This product offer manual or semiautomatic two type for your optional.
4. This product offer one degree or five degree for your optional.
YIH KUAN ENT CO., LTD.
Product Description :
1. IK milling heads can upgrade or replacement your original machine body, milling machine or special machine.
2. Chrome quill with super precision preloaded bearing can bring the high quality cutting benifits for machine and we also offer P4 bearings for your optional.
3. Machining travel can up to 127mm (5").
4. This product offer NT30 or R8 two kind of spindle machine model for you to optional.
5. Offer table 254x1720mm、X.Y.Z travel 851x405x440mm turret milling machine body (whole body) for you to optional.
6. There are 11 models in IK Turret Milling Machine Head Series.
With ultra-precision pre-load bearings, can bring you high-quality cutting benefits, but also provide P4-class bearings for you to choose from
YOUN JIN ENTERPRISE CO., LTD.
Product Description :
End Mill cutting & grinding Machine YCE-616
GRINDING RANCE 6~16 MM
JAR HON MACHINERY CO., LTD.
Product Description :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic tapping process. One operator can easily operate several machines at the same time.
3.By using proper master pitch gears(change gears A and B pair), highly accurate thread can be tapped. It is easy and quick to change different size.
4.The length of the tapping stroke can easily be adjusted for high accuracy which is suitable for tapping blind hole parts.
5.It has safe device to monitor the feeding, torque, radial, and clamping to keep TAP's long life and ensure safe working job.
6.It governed by PLC.
7.Long parts or those can't feed in vertical position are suitable.
8.Pre-work parts auto-checking and machine auto-stop if abnormal.
