Theme
Digital Transformation
Green Transformation
TSYR TZUN INDUSTRIAL CO., LTD.
Product Description :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
TAIWAN 3AXLE TECHNOLOGY CO., LTD
Product Description :
Feature of product :
The light spot can be adjusted from 0 to 300mm;
Rust removal gun weight 0.7KG
The system monitors the running status from time to time, monitors and collects the running status of lasers, chillers, and control panels;
Light weight, small size, ergonomic design, comfortable grip;
The safety lock touches the light;
The operation is simple and easy to use, and the requirements for operators are extremely low;
Strong anti-interference;
The fully sealed structure has built-in water and air channels;
Safe and pollution-free, low maintenance cost;
The hand-held laser rust removal and cleaning machine adopts the latest generation of optical fiber laser, which has the advantages of simple operation, small appearance and fast cleaning speed. It has an irreplaceable cleaning process in hardware material rust removal and oil removal. Easy to install, control and automate. Simple to operate, turn on the power and turn on the equipment, you can clean without chemical reagents, media, dust and water, you can manually adjust the focus, clean with curved surfaces, and clean the surface with high cleanliness Advantages, can remove resin, oil, stain, dirt, rust, coating, plating, paint on the surface of the object.
YING HAN TECHNOLOGY CO., LTD.
Product Description :
Suitable for cutting various metal sheets
■Maximum cutting thickness of metal sheet varies with the laser power.
■Upon customer request, the machine can be designed with a work piece platform as mechanism(optional). It helps to reduce work piece loading/unloading time, which in turn upgrades operation efficiency.
■Large laser power, high efficiency and high productivity.
■Equipped with an intelligent digital controller featuring humanized control, which is easy to learn and operate.
■The specially designed software allows the operator to design the graphs on characters with ease, then machining can be conducted immediately.
■Enclosed splash guard
■Fast machining, power saving, outstanding safety protection, low trouble and easy maintenance.
For cutting commonly used metal sheets such as:
■Carbon steel sheets
■Alloy steel sheets
■Galvanized steel sheets
■Stainless steel sheets
GUANDA INTERNATIONAL MACHINERY CO., LTD
Product Description :
Specifically designed for steel beam / structural steel processing. STD 105 equips with 3 spindles working simultaneously. Each spindle works with a BT-40 ATC, which increases the working efficiency and flexibility.
We apply MQL (minimum quantity lubrication) not only to improve the working environment but also to reduce the operation cost.
We provide various automation solutions to meet your needs.
RINGTECH INSTRUMENTS CO., LTD.
Product Description :
IFP vacuum cleaning machine can effectively clean any size and structure of complex metal products, great for either large or small amount of cleaning, it is also the best vacuum cleaning machine available for environmental protection and energy-saving! The cleaning cycle is carried out in a complete vacuum environment that the working environment is clean and odourless. During operation, the user can select different options from spray, rotate, ultrasonic, rinse...etc. based on the workpiece. With the cutting edge iFP cleaning technology, overcoming difficult cleaning situations such as cleaning blind holes, slits can be effortless. After cleaning, the chips and residual cutting oil will be separated from the cleaned workpiece, the chips are fully dried and can be collected from the filter; the residual cutting oil will also be separated from water and could be recycled and reused.
Facing the new industry trend and the new future, IFP cleaning machine is your best cleaning choice!
LEPAO ELECTRICITY MACHINERY CO., LTD.
Product Description :
Features
Double servo system, close-loop control , precision transmission, accurate in location
There are 6 combination of working coordinates in the system, it is convenient to design
programs and process workpiece
Showing location immediately, self-diagnostics and indicating error function
Providing with Start, Stop, manual fine-tuning, returning origin when it finished,
convenient to operate
Editing and modifying working program on controller
Chinese/ English switch , easy to operate
Supporting memory card, or USB to load files
The program can make by CAD/ CAM
Previewing route of working program
Control axis X , Y 6 axis maximum
Collocating with Pipe cutting, driller
8 inches LCD, a concise panel
Can install「Dust Collector 」
MATRIX PRECISION CO., LTD.
Product Description :
GVP-8040 applies the FANUC controller and high speed grinding spindle, through the Matrix developed intelligent conversations window software, it can flexibly output the required tooth profile and grinding parameters. The machining workpieces include involute gears, large-module hobs and cycloidal gears, the high-efficiency and high precision expressed from the products are equivalent to worldwide top brand’s ones. GVP-8040 is your best choice.
RICH SOU TECHNOLOGY CO., LTD.
Product Description :
This machine is an improved model from the Y Rail model, featuring similar functions.
Designed standard with 4-station hanger with two side doors on blasting chamber. To meet your specific production line requirements, additional hangers are available for the entire working environment. Contact us for further details.
Features:
1.The machine employs a PLC controller for continuous cycles of blasting operation.
2.The cycle motions are: the hanging shaft enters the blasting chamber, and then moves to a fixed position at a lower speed. The door closes automatically.
Once the door is closed, the blade starts running automatically, and the machine performs blasting. Once operation is accomplished, steel balls are supplied and the blade stops automatically.
When the blade comes to a complete stop, the door opens automatically. When the door opens to the fixed position, the chain conveyor quickly delivers the nest hanging rod into the blasting chamber, then moves forward at a lower speed to a fixed position.
The door closes automatically and performs the nest cycle of blasting operation.
JAR HON MACHINERY CO., LTD.
Product Description :
1.The machine can be attached double spindle head and work efficiency can be more increased.
2.Both cutting TAP and forming TAP are suitable.
3.The length of the tapping stroke can easily be adjusted for high accuracy which is suitable for tapping blind hole parts.
4.It has safe device to monitor the feeding, torque, radial, and clamping to keep TAP's long life and ensure safe working job.
5.It can install additional hopper to increase automatic working.
6.It can install additional sheet metal cover to gain more safety and reduce noise.
7.Pre-work parts auto-checking and machine auto-stop if abnormal.
MAHO ENTERPRISE CO., LTD.
Product Description :
Electric tapping machine is suitable for different size taps (from M3 to M24). The machine is equipped with brushless DC motor and driver for controlling the spindle to tap. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
