Theme
Digital Transformation
Green Transformation
Mighty Spraying Technology Co., Ltd.
Product Description :
1. High pressure diaphragm pump with high efficiency.
It pumps wide range viscosity fluid (Max. 160 cst.).
2. Build-in circulating pump(U.S. Patent No.:
11542934), prevent overheat and service life time.
3. Simple and compact design, can be run in dry
condition without damage to the pump
in case of accident or operator error.
4. Low pulsation, prevent vibration of cutting tools.
5. Low rpm working is available, Minimum rpm:
300rpm.
6. High working pressure: 70 bar.
7. Energy saving, especially when combine with
brushless electric motor can be run at very low
speed under very low power consumption.
ZHAO YI HSIN INDUSTRIAL CO., LTD.
Product Description :
Providing clean compressed air without energy consumption
No power required
Applying characteristics of compressed air, hydromechanics and physical principles to design internal structure.
Consumable-free, maintenance-free
Exclusive patented structural design can separate moisture from compressed air without consumables.
Efficiency of air drying and moisture filtration: 99%
Patented high efficiency water-cooled heat exchanger and special air-water separation structure.
High quality, durable, and longevity up to 10 years
No compromise on quality, the product is made in Taiwan.
No electronic and other energy-driven device
Suitable for those who have special needs for compressed air.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
Parjet Co.,Ltd.
Product Description :
ParSave® - Bearing Isolator, is an extension of Parjet PTFE products. It is a sealing device developed to protect the rolling bearings of rotary equipment and can replace traditional lip seals (also known as rubber oil seals). The special configuration of the labyrinth ring combination helps to eliminate common sealing issues. Common issues includes the shaft damages caused by the wear of the rotating shaft from the lip seals and malfunction caused by the intrusion of foreign objects or water vapor. ParSave® can effectively extend the service life of the bearings and rotating shafts. Additionally, due to the unique sealing mechanism, there is no contact between mating surfaces, so there are no potential wear and pollution problems. With the characteristics of the PTFE material such as excellent heat resistance, self lubrication and chemical resistance, ParSave® can operate effectively under harsh environments.
TAIKI INDUSTRIAL CO., LTD.
Product Description :
The jaw t-nuts (T08) are suitable for Kitagawa B-208 Chucks.
The jaw t-nuts connect with a power chuck and soft jaws.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
CHUAN TAI HYDRAULIC MACHINERY CO., LTD.
Product Description :
The oil level gauge is made of special materials by injection molding, which has anti-impact characteristics and is not prone to cracking during installation.
Special specifications can be customized
HUI BAO ENTERPRISE CO.,LTD
Product Description :
FEATURES：
Able to clamp the workpiece from both inside and outside, apply for embedded sensor, two directions inlet
APPLICATION：
CNC loading and unloading the workpiece, jigs and fixture
HYDROKOMP GmbH
Product Description :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
FUTECH PRECISION CO.,LTD.
Product Description :
Ultra-short, large-diameter rotary hydraulic cylinder, lightweight design, more stable performance during high rotation, reducing spindle load.
The built-in safety self-locking valve ensures the pressure is immediately maintained during abnormal power outage and the built-in pressure relief valve.
Dual-purpose type, can be installed by the front and rear ends.
DERYUN PRECISE INDUSTRIES CO., LTD.
Product Description :
Focusing on making heat exchangers, water/oil coolers, A/C systems, refrigeration equipment etc., Deryun Precise Industries is known as a cooling-system authority, offering dedicated designing and planning as well as the longest warranty amongst competitors, plus the best after-sales service.
Our products help machine tools and industrial machinery to effectively control processing temperature and humidity, which not only prolong operating life of controllers but also enhance precision and stability of machinery to upgrade output quality. Contact us for quality products that better protect your machinery.
CHUAN TAI HYDRAULIC MACHINERY CO., LTD.
Product Description :
The oil return filter is mainly installed on the oil return line of the hydraulic system. Various impurities such as abrasive particles generated during the work of various hydraulic components can be blocked by setting the oil return line to filter and avoid returning to the tank again.
