Theme
Digital Transformation
Green Transformation
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
SHAN HUA PLASTIC INDUSTRIAL CO., LTD.
Product Description :
善化工業股份有限公司專業生產符合SAE100R7、SAE100R8規範之高壓油管。<br />
擁有最多樣尺寸、顏色、配置及包裝供客戶選擇。<br />
產品特點為重量輕，約橡膠管重量的1/2，受壓力時，曲線不變。<br />
採用耐候、耐磨擦、耐油性的特殊材質。可耐用各式酸鹼，並可選擇外管顏色，便利於顏色管理，亦可選擇導電和非導電型，以確保機台人員的安全。<br />
用途方面，除了可以完全取代傳統橡膠管外，可用於各式高壓液體、高壓氣體、噴塗裝機、清水溝車、農業機具、轉向系統、船舶用管等，各式液、氣體配管均可使用。<br />
WEXTEN PRECISE INDUSTRIES CO., LTD.
Product Description :
■ Maintained the constant oil temperature in order to prevent process-ing precision-losing.
■ Kept oil viscosity and avoid oil deterioration to stable spindle working.
■ With the temperature control panel to avoid thermal expansion.
■ Built-in failure-detection system that connects to control panel in order to warn users and prevent further damage to machine.
■ Filling high-efficiency environmental refrigerant, without pollution.
HYDROKOMP GmbH
Product Description :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
