Theme
Digital Transformation
Green Transformation
TAIWAN SPINFLO CO., LTD.
Product Description :
-Accuracy temperature Control at ±0.1℃, solve machine tool maker and manufacturing reduce machine’s life that running long time and high temperature.
-Continue using high-accuracy control let machines get more accuracy and do perfect products.
-Not only good performance but also can get high efficacy in different area.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
FUTECH PRECISION CO.,LTD.
Product Description :
Ultra-short, high speed, light weight.
Designed with a detection device, which can be equipped with an inductive proximity switch.
Easy to adjust to ensure the correct operation of the hydraulic cylinder.
Built-in safty self-locking valve and pressure relief valve.
Dual-purpose type, can be installed by the front and rear ends.
The oil pipe must be connected to the oil pressure tank separately to avoid back pressure.
R PLUS TECHNOLOGY CO., LTD
Product Description :
Rplus pneumatic thermal cutters are designed for plastic molding and specified configuration. A designed pair of thermal knifes with a suitable heating rate, the unique design will reduce the heating time and reach the setting temperature in few seconds. The shearing is driven by a dual rod cylinder with 0.15~1Mpa range pressure.
Knifes are made by alloy special steel with heat-treatment. The heating capacity is 150W within 8mmx35mm heating bars , the range is 60~350C. The dual rod cylinder drives the thermal knifes will lead to a stable shearing effect, as well as higher efficiency, reduce the loss, faster shearing and depends on different type of plastic can be set variable heating temperature.
For modern manufacturing, we can integrate on a robot arm and automatically processing line.
Examples of widely application as head lamp of automobile,optical lens, acrylic products and Polycarbonate,etc. We forward to offer a safer , easier and efficiency tools.
HYDROKOMP GmbH
Product Description :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
TORNG INDUSTRIAL CO., LTD.
Product Description :
* To provide cooling, lubrication and chips removal functions simultaneously.
* It's designed for machinability, machining speed and extend the tool life.
* To save machining time and reduce machining cost.
* To ensure high quality of machining and cutting performance.
DYNA COMPRESSOR CO., LTD.
Product Description :
2 STAGE ROTARY SCREW
Powerful two stage compression performance surpasses one stage compression.
For this series of new designs, we use two-stage compression. The compression efficiency creates the most energy-efficient air compressor, keeping the flow rate, power consumption and temperature in the best condition, making the screw air compressor more energy-saving, more power-saving, and more suitable for your use. Improve your production efficiency, and also greatly save power consumption. Our design and manufacturing technique has always been being the quality guarantee.
