Theme
Digital Transformation
Green Transformation
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
WEXTEN PRECISE INDUSTRIES CO., LTD.
Product Description :
■ Maintained the constant oil temperature in order to prevent process-ing precision-losing.
■ Kept oil viscosity and avoid oil deterioration to stable spindle working.
■ With the temperature control panel to avoid thermal expansion.
■ Built-in failure-detection system that connects to control panel in order to warn users and prevent further damage to machine.
■ Filling high-efficiency environmental refrigerant, without pollution.
Parjet Co.,Ltd.
Product Description :
ParSave® - Bearing Isolator, is an extension of Parjet PTFE products. It is a sealing device developed to protect the rolling bearings of rotary equipment and can replace traditional lip seals (also known as rubber oil seals). The special configuration of the labyrinth ring combination helps to eliminate common sealing issues. Common issues includes the shaft damages caused by the wear of the rotating shaft from the lip seals and malfunction caused by the intrusion of foreign objects or water vapor. ParSave® can effectively extend the service life of the bearings and rotating shafts. Additionally, due to the unique sealing mechanism, there is no contact between mating surfaces, so there are no potential wear and pollution problems. With the characteristics of the PTFE material such as excellent heat resistance, self lubrication and chemical resistance, ParSave® can operate effectively under harsh environments.
HABOR PRECISION INC.
Product Description :
> Applications
CNC Machining Center、CNC Grinding machine、Broaching machine、CNC Wood-working 、Machine、CNC Mechanical Press、CNC Lathe、High Speed Lathe
Hydraulic Unit
High Speed Spindle
> Feature
Prevent temperature increasing of spindle, improve working precision of machine.
Prevent deviation of spindle center line or heat deformation of machine.
Extend the lifetime of the machine.
Stabilize oil pressure, prevent oil vibration.
Easy operation, low noise.
DYNA COMPRESSOR CO., LTD.
Product Description :
PM MOTOR
With powerful driving core, it is more energy-saving and energy-saving
The biggest advantage of permanent magnet variable frequency air compressor is energy saving by 10%~35% in average. It depends on the working condition of the air compressor and the setting of the frequency converter.
If the air consumption fluctuates, the energy-saving effect is better. Using a high-efficiency and energy-saving control system, the starting current is small and reduce the impact on the motor and electrical components; the life of the motor is extended, and the impact on the equipment and machinery is relatively reduced.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
Product Description :
1. Fixed amount of oil feeding that can supply the required amount of oil to each lubricating point.
2. There are various choices of discharge volume, 0.1, 0.2, 0.3, 0.4 and 0.5cc per stroke. The discharge volume of each outlet can be different.
3. Each discharge outlet has a detective piston that can detect if the pipe system works functionally.
4. T type 0.5cc can be assembled either NO (Normal Contact) or NC (Normal Close) Contact sensor switch. It also can be set up as NO or NC Contact upon request. When it is set up as NO Contact, it sends signal during the operation time. When it is set up as NC Contact, it sends signal during the interval time.
5. T type volume distributors accumulate oil inside of the distributor and discharge oil during the interval time.
6. T type volume distributors have to work with oil pressure-relief type lubricators. The lowest operation pressure is 8 kgf/c㎡ and the max pressure is 30 kgf/c㎡.
7. The viscosity range of oil is 32 ~90 cSt @ 40℃.
WEXTEN PRECISE INDUSTRIES CO., LTD.
Product Description :
■All models use DC inverter compressors with smooth start-up, no instantaneous large
starting current characteristics, and low power consumption.
■When the heat load is low, the cooling unit operates at a low load, with high energy efficiency.
■The exclusive design of the multi-function LCD panel with an accuracy of ±1℃ can keep the
electric cabinet at a constant temperature, control heat sources, and improve the lifespan of
electronic components.
■ Uses environmentally friendly refrigerants with low Global Warming Potential (GWP) values.
■More than 95% of materials that can be recycled, contributing to environmental protection.
DYNA COMPRESSOR CO., LTD.
Product Description :
Air end compression system
100% imported from Germany. Inorder to ensure the quality ofoperation and stable air flow of the air compressor, we use Germanhigh-precision rotors with stableperformance, excellent quality, and more durablity.
Dyna Compressor With continuous R&D and renovation, our product is advance with times, our goal is to be the most competitive brand,
professional, exquisite, design that with enough flexibility and mobility to meet challenges of the market. Customized is our standard procedure. We grab every possible chance to provide new opportunity and vitality for
industrial reengineering. Under this rapidly changing, competitive era, the
only constant belief of ours is “quality is our strength”.
