Theme
Digital Transformation
Green Transformation
SPINDLEX TECHNOLOGIES CO., LTD.
Product Description :
Spindle housing diameter : 45mm
Tool interface : SD6
Maximum speed (rpm) : 50000 RPM
Lubrication : Grease
Motor power : 0.45/0.54 Kw
JIUH-YEH PRECISION MACHINERY CO., LTD.
Product Description :
1. 高剛性的立柱 2.2.日本濱田高低變速齒輪頭 3.高壓沖屑裝置 4.高精度硬軌,提升切銷穩定性。 5.全密閉式外罩,低噪音,防止漏水。 6.結合面接採用鏟花精密製造
WELE MECHATRONIC CO., LTD.
Product Description :
1.高剛性高穩定性結構
A. 底座:機器底座採用整體式鑄件,有效確保機器剛性。Z底座採4線軌設計,全行程範圍內直接落地支持,有絕佳的剛性及穩定性,確保整體長期幾何精度。
B. 滑座:滑座採用整體式鑄件,支撐於Z底座上,4線軌設計增加滑座負載剛性。
C. 立柱:立柱採用整體式鑄件,有效確保機器剛性;且固定不移動,大大減少主軸移動行程中所帶來的幾何精度誤差影響。
2. XYZ三軸及W軸導軌均採用先進的超重負荷型「滾柱」線性導軌,大幅度提高導軌「剛性」和「重切削能力」,也繼續保有「低摩擦力、低磨耗、低遲滯現象、低失位量、高速度、高精度、高動態特性、高壽命、不需調整」等線性導軌的優良特性。
3.XYZW四軸的均有過負載保護,如因誤操作造成撞機,可有效降低對機器的損傷。
4.雙編碼器回饋裝置(配置於XYZ三個進給軸),B軸採用(圓光栅-角度編碼器) 廠牌:發格Fagor。
5.主軸箱等關鍵零件係利用「大型臥式搪孔機」及「大型高精度三次元量測儀(三座標量床)」確實達成應有的加工精度,確保優良的組裝基礎。
6.鞍頭:110主軸系統配備搪孔軸直徑110mm,搪孔軸行程W=500mm、3500 rpm(兩檔齒輪箱)。搪孔軸為氮化處理高硬度合金鋼件,前段支持使用傳統的硬化襯套外,後段附加線性導軌的加強支持,借助滾動低磨耗的特性,增長搪孔軸的精度壽命。
7.主軸前軸承採用直徑150mm的高精度主軸軸承,加上改良設計的軸承配置及潤滑設計,有效的提高主軸剛性和壽命。
8.主軸鬆刀採浮動式抓鬆刀裝置,鬆刀時不會施力於主軸軸承上,可長保主軸最佳精度;另,新式鬆刀缸配置設計,可使主軸於任一行程(W軸)位置換刀。
9.特殊設計的自動潤滑系統;潤滑油與切削液分開, 單獨收集可確保切削液的穩定性及工作環境的清潔。
10.刀庫採立柱側背式設計;刀庫與立柱接合,不同於落地型式,立柱固定不移動,刀庫與鞍頭配置可達成左右平衡架構,提高W軸動態穩定特性。
11.承襲歐美先進工具機廠的標準,以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密度的基礎,對各項關鍵零件進行精密鏟花(刮研),使機器的各處結合面和滑動面均能達到正確的幾何精度,確保機器應有的精度和壽命。
12.採用的各項配套零組件均經過長期使用驗證,可確保機器長期運行的可靠性。
13.電氣箱採全密閉式循環熱交換系統,內部配線均參考德國工業安全標準,電源部份與訊號線區隔,以增加機器使用上的安全。
14.搭配高規格的Fanuc 0i MF Plus數控系統,標準功能包含:15吋彩色液晶螢幕、Fanuc全鍵式操作面板、1280米記憶容量、Ethernet網路接口、Flash記憶卡插口、Manual Guide i圖形對話式編程、剛性攻牙、手動剛性攻牙、AI contour control II等多項高規格功能,能經濟有效的滿足各種使用需求。
15.完整的品檢測試流程,搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等精密檢測儀器,確保出廠的機器都能達到設計的性能和應有的功能。
16.經驗豐富的研發團隊,突破老舊的包袱,協助客戶達成各種特殊需求。
17.兼具經驗和熱誠的服務團隊和完整的服務體系,可以及時有效的讓用戶的機器長保最佳使用狀態。
YEONG CHIN MACHINERY INDUSTRIES CO., LTD.
Product Description :
Most Popular High Performance NSV106AS is well suited for superior surface finishing works, specially in automotive, job shop and electronics industries. ■ Large delta machine column and base ensure the highest stability during high speed movement■ High precision roller type guideways on all 3 axes■ High precision linear guideway with 6 slide blocks on X-axis■ High performance YCM in-house designed spindle with low vibration to achieve excellent finish
JIUH-YEH PRECISION MACHINERY CO., LTD.
Product Description :
1.以「電子式MPG」自動化技術、減少誤動作、節省人力
2.MPG微量進給,高精密、高效率之滾珠螺桿,及伺服馬達
3.人機介面之設計
4.立臥兩用雙主軸一體式結構設計
5.主軸溫升防護系統、潤滑油冷卻循環裝置加上非接觸式與迷宮式路徑結構設計
REN AN INFORMATION TECHNOLOGY CO., LTD.
Product Description :
Just like the real CNC machine, equipped with exactly same overall appearance, actual handwheel and real machine operation panel as numerical control machine.
Solving the difficulties of real machine: precise, complicated and very expensive.
With CNC Simulator, everyone can learn CNC machine operation and accumulate hands-on operation skills.
CNC training machine is equipped with exactly same overall appearance, actual handwheel and real machine
operation panel as numerical control machine. Its purpose is to train students for accumulating CNC machine operation skills (program transmission, programming, tool selection, tool compensation and alarm clear )
Overall design is more attractive, and it emphasizes on interaction to make students less mistakes happened.
Not only decreasing learning cost but also letting students work and learn in the safe environment.
REN AN INFORMATION TECHNOLOGY CO., LTD.
Product Description :
Guided-steps CAD/CAM with Machining Simulation including tool path verification and machining time.
Excellent tool for learning CAD/CAM and verifying with simulation.
HEIDENHAIN CO., LTD. (TAIWAN)
Product Description :
Angle encoders for rotary and tilting axes are indispensable for machine tools on which high positioning accuracy and a high machining rate are essential. Because angle encoder measure angular motion of the axis directly and immediately. Mechanical transfer elements therefore have no influence on position measurement, both kinematics errors and the influences of forces are measured by the angle encoder and considered in the position control loop. This can eliminate a number of potential error sources: Gear errors, reversal error, errors due to deformation of the drive mechanics by machining forces.
YIH KUAN ENT CO., LTD.
Product Description :
The Plano Milling Head (Gantry Milling Head) are commonly used milling machine heads such as gantry milling machines, boring milling machines, and double-head milling machines. Uses include rough milling, finishing milling, boring holes... and other processing requirements.
The left and right vertical milling heads offer excellent flexibility and adaptability. Their adjustable angles and swivel capabilities enable operators to perform angular milling, drilling, and other complex operations with ease. They are compatible with different milling machines, providing a seamless integration into existing setups or as a valuable addition to new milling machine installations.
1. IK milling heads can upgrade or replacement your existing machine body, milling machine or special machine and also it can bring more stable and high-quality machining benefits for work piece cutting.
2. It is used for mold manufacturing or precision processing.
3. The machine processing for travel is 320 mm. We also provide “No slide” format.
4. This product is used in Gantry (Plano) Milling Machine (vertical / horizontal), suitable for heavy metal cutting.
5. Plano milling head series offer accessory head for you to optional.
It will apply for multi-angle machining to upgrade efficiency and longer machining range.
6. This product of standard motor is 10HP. We also offer 12.5HP for you to optional.
7. Offer pneumatic blade locking device, bearing guide screw, pneumatic leveler for you to optional.
8. There are 10 models in IK Plano Milling Machine Head Series.
CHIEN CHENS MACHINERY CO., LTD.
Product Description :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
A axis travel: 370 mm
Y slide way width: 720 mm
Z Slide high: MAX 700 mm
Z Slide way width: 420 mm
Spindle taper: NT#40(BT)
Spindle motor: 5HP / 4P
Spindle speed: 70~3600 RPM
Horizontal Spindle motor: 5HP / 4P
HorizontalSpindle speed: 70~3600 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3500 kgs
TONGTAI MACHINE & TOOL CO., LTD.
Product Description :
‧The VP-12 combines the advantage of a smaller footprint with a large internal machining space, equipped with a high-speed spindle to meet the requirements of efficient and precise machining.
‧Direct-drive spindle BBT-40 provides a high rigidity and high efficiency.
‧The tool magazine allows for flexible tool placement and pre-selection, coupled with a high-speed ATC mechanism to reduce non-cutting time, showcasing efficiency similar to drilling and tapping machining centers.
‧High quality spindle and high rigidity structure design subject to high standards of machine accuracy to achieve good cutting performance.
‧By Tongtai production system, we check every detail process from design, manufacturing, assembly and QC.
HC FENG CO., LTD.
Product Description :
4 in 1 Coolant Purification System
1. Filtering floating debris and dirty particles
2. Oil/Water Separation, removes tramp oil down to 5% water content
3. Ozone Disinfection, eliminates bacteria and cleaned fluid backflow
4. Automatic control panel and pH detect device