Theme
Digital Transformation
Green Transformation
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
*High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
*Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
*Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
Taiwan TeamA Tech. Co., Ltd.
Product Description :
Form 3L為 Formlabs 推出的大型光固化3D列印機,是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機,讓您的想像力不受限!採用最新專利研發的低應力光固化成型技術(LFS),擁有彈性樹脂槽與封閉式光學模組(LPU)等,大幅增加了機器的可靠與穩定性,精確度、平滑度及透度都大大增加,讓您的大物件也擁有精緻細節!搭配Form Wash L自動清洗機與Form Cure L溫控光固機,以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台,並使用兩個500W加熱器與大功率紫外線燈全方位高度強化,發揮材料最佳性能!
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料,安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材,好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
HOMGE MACHINERY IND. CO., LTD.
Product Description :
1) Patented stud bolt seat design can efficiently calibrate the clamping center.
2) It is recommended to operate with a Master Plate on a five-axis machine.
3) Compatible with Robotic Arms.
Product Data:
1.Vise body is made of High quality Steel (S50C) and its slideways gone through high-frequency hardening to achieve HRC50, which makes the whole part durable.
2.Detachable jaws are made of High quality Tool Steel (SCM440) and gone through carburizing to achieve HRC55. Since both sides are fixed size and able to be used as a datum, users can reverse them to increase clamping range.
3.The vise's clamping force can achieve 1300KG, the repeatability positioning precision of its clamping center is within ±0.02mm.
4.Users can calibrate the clamping center of vise by adjusting the screws on both ends.
5.The 45° dovetail structure with teeth on the upper jaw ensures the bottom of the workpiece to be firmly clamped.
6.Applications: precision machining of four-axis, five-axis, CNC indexing table and vertical and horizontal CNC milling machines.
Taiwan TeamA Tech. Co., Ltd.
Product Description :
擺脫時間、地點的限制,利用自動化生產解決方案再創生產率新高!無需人工操作,24小時不停機生產,製造大量、高質量物件,使用 Formlabs 自動化解決方案(包含 Form Auto、群機管理和高容量樹脂系統),在 3D 列印工作流程中更高效的工作並重新定義生產能力。在不增加列印機管理複雜性的情況下擴展您的零件生產。從任何地方點擊發送,Formlabs 自動化解決方案將處理剩下的工作流程。
【最大程度地降低每個零件的成本,節省高達 80% 的勞動力】
在 Form Auto 出現之前,每個完成的零件都需要在後處理之前從成型平台上手動移除。Form Auto 透過將 Formlabs 獲得專利的「快速剝離技術」與「成型平台 V2 」結合使用,完全自動化地移除零件。蒐集的零件被放置在防紫外線的容器中,無縫批量轉移到 Form Wash。
【24 小時不間斷 3D 列印,無需額外程序】
Form Auto 自動化生產系統旨在不閒置列印機、不讓列印物件在序列中等待,無論現場是否有操作人雃,Form Auto 始終準備好開始下一次列印。 隨時隨地構建多列印機群,從辦公室點擊「列印」,立即在生產間開始生產。透過群機管理中的圖像和影片遠程監控和審查成品零件,設備內相機在完成時捕獲每個列印件來保存每個部分的記錄。
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
JIN YEAR PRECISION CO., LTD.
Product Description :
1.Down thrust with"semi-sphere"to prevent workpiece lift.
2.Mechanical/Hydraulic. Two operate methods.
3.Vise body is made of ductile iron FCD-60.
4.Vise bed hardened to HRC45 and maintain accuracy for long.
5.Vise bed height-size and the guide block side are all made with full control, can 2.3 or 4 vises to perform a job at a time.
6.Vise have 4 ways of clamping. For you to choice.