Theme
Digital Transformation
Green Transformation
TAI CHONG CO., LTD.
Product Description :
用途: CNC切削中心機,銑床,龍門銑床,電腦銑床等切削作業。<br />
特性:<br />
本體與面板一體成型加工完成。<br />
以電控操作,快速充脫磁場變換。<br />
以永久磁鐵吸著工件,沒有停電的危險性。<br />
吸磁作業面,螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊,針對變形平面,作平面加工,大量節省調整時間,提高工作效率。<br />
結構剛性佳,配合精度穩定,適合高精度加工作業。<br />
與強力型電磁鐵比較,大幅度節省電力消耗。<br />
防水效果最確實,保證不漏水,不漏電。<br />
平均吸磁力18kgf/cm2以上。
BEST DIAMOND INDUSTRIAL CO., LTD.
Product Description :
[AR-800 旗艦多功能型]
Multi-function Flagship Type
*With the most advanced design that provides the
multi-function of Ultrasonic, Brush DC (direct-current) and
Brushless DC output.
*All new design with high-efficiency microprocessor that
give the machine with perfect performance.
*The brushless DC with max. 250 watts and brush DC with
max. 150 watts output power that gives your handpiece
with high torque and high speed running.
*The LED speed display shows you the running speed of
brushless hanpiece. You can select the best and safe speed
according to various tools and diameter.
*Once turn on the machine, the system will automatically
adjust the speed to “Zero”, that keep you away from
the damage caused by high speed running of handpiece.
[AR-108 單功能型]
Single Function Practical Type
*Ultrasonic lapping function only.
*The machine provides reliable quality and good
performance.
*Max.40 watts output that satisfy difference of
polishing works.
*It is not only effective for lapping task, but also good for
correction of PCB patterns.
YOKE INDUSTRIAL CORP
Product Description :
1. 360° rotation and 230°pivot
2.Rotatable under load due to its unique ball bearing design.
3.Manufactured in accordance with EN1677‐1 and the requirements of ASME B30.26
4.Certified by DGUV GS‐OA‐15‐04
5. Forged alloy steel, quenched and tempered
6.With the Grade 100 High‐strength alloy steel, WLL is increased without increasing swivel size compared to other Yellow Point models.
7.4:1 Design factor
8.100% Magnaflux crack detected
9.Proof load at 2.5 times the WLL
10.Fatigue rated for 20,000 cycles at 1.5 times the WLL
Taiwan TeamA Tech. Co., Ltd.
Product Description :
Form 3L為 Formlabs 推出的大型光固化3D列印機,是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機,讓您的想像力不受限!採用最新專利研發的低應力光固化成型技術(LFS),擁有彈性樹脂槽與封閉式光學模組(LPU)等,大幅增加了機器的可靠與穩定性,精確度、平滑度及透度都大大增加,讓您的大物件也擁有精緻細節!搭配Form Wash L自動清洗機與Form Cure L溫控光固機,以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台,並使用兩個500W加熱器與大功率紫外線燈全方位高度強化,發揮材料最佳性能!
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料,安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材,好拆不麻煩
8. 繁體中文切片軟體PreForm超好用