Theme
Digital Transformation
Green Transformation
Taiwan TeamA Tech. Co., Ltd.
Product Description :
formlabs 熱銷光固化機種 Form 3+/3B+ 搭載專利研發「低應力光固化成型技術(LFS)」,其特色包含彈性樹脂槽與封閉式光學模組(LPU)等,雷射光可垂直照射到物件,大幅增加機器的可靠與穩定性,可印出高精確度、平滑度及透度更佳的高品質物件,桌面級的機種,也能達到工業級的效果。
搭配上為 Form 3+/3B+ 量身打造的後處理設備-自動清洗機 Form Wash 及恆溫光固機 Form Cure,提供完整、快速的 3D 列印製造流程。
Form 3+ 六大特色包括:
1. 前所未有的表面精細度
2. 極平滑的物件表面與透度
3. 彈性樹脂槽使成功率大增
4. 遠端列印超easy
5. 無與倫比的30多種多元樹脂材料
6. 輕觸支撐材帶來最佳效率
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
CLAMPTEK ENTERPRISE CO., LTD.
Product Description :
*High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
*Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
*Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
BEST DIAMOND INDUSTRIAL CO., LTD.
Product Description :
All New BESDIA® Ceramic Fiber Stone use the special ceramic fibers combinated with the unique bonding material and manufacturing process. Compare to other brand :
1. Our improvements in production processes give better tensile strength to the stones, hence fewer breakages.
2. A polishing efficiency increase of 10% to 20% has been achieved.
3. Durability under the same working conditions has been increased by 10% to 30%.
TAI CHONG CO., LTD.
Product Description :
用途: CNC切削中心機,銑床,龍門銑床,電腦銑床等切削作業。<br />
特性:<br />
本體與面板一體成型加工完成。<br />
以電控操作,快速充脫磁場變換。<br />
以永久磁鐵吸著工件,沒有停電的危險性。<br />
吸磁作業面,螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊,針對變形平面,作平面加工,大量節省調整時間,提高工作效率。<br />
結構剛性佳,配合精度穩定,適合高精度加工作業。<br />
與強力型電磁鐵比較,大幅度節省電力消耗。<br />
防水效果最確實,保證不漏水,不漏電。<br />
平均吸磁力18kgf/cm2以上。
Taiwan TeamA Tech. Co., Ltd.
Product Description :
擺脫時間、地點的限制,利用自動化生產解決方案再創生產率新高!無需人工操作,24小時不停機生產,製造大量、高質量物件,使用 Formlabs 自動化解決方案(包含 Form Auto、群機管理和高容量樹脂系統),在 3D 列印工作流程中更高效的工作並重新定義生產能力。在不增加列印機管理複雜性的情況下擴展您的零件生產。從任何地方點擊發送,Formlabs 自動化解決方案將處理剩下的工作流程。
【最大程度地降低每個零件的成本,節省高達 80% 的勞動力】
在 Form Auto 出現之前,每個完成的零件都需要在後處理之前從成型平台上手動移除。Form Auto 透過將 Formlabs 獲得專利的「快速剝離技術」與「成型平台 V2 」結合使用,完全自動化地移除零件。蒐集的零件被放置在防紫外線的容器中,無縫批量轉移到 Form Wash。
【24 小時不間斷 3D 列印,無需額外程序】
Form Auto 自動化生產系統旨在不閒置列印機、不讓列印物件在序列中等待,無論現場是否有操作人雃,Form Auto 始終準備好開始下一次列印。 隨時隨地構建多列印機群,從辦公室點擊「列印」,立即在生產間開始生產。透過群機管理中的圖像和影片遠程監控和審查成品零件,設備內相機在完成時捕獲每個列印件來保存每個部分的記錄。