Theme
Digital Transformation
Green Transformation
TAIHO TOOL MFG. CO., LTD.
Product Description :
The AERO series is very suitable for high-power equipment above 80KW.
It has a sharp cutting edges and grooves for great efficiency of discharging the chips. The coating is OSG's diamond coating with glossy surface. This bright and smooth surface optimizes the performance of the end mill, especially in aluminum alloy that weldability and lubricity are required.
The 3-short-blade type and center jet type (AERO-ETS, AERO-O-ETS) are corner radius end mills applied to roughing and finishing.
The 3-long-blade type and extra long blade type (AERO-ETL, AERO-EXTL) are corner radius end mills applied to roughing and finishing.
The 2-short-blade type (DLC-AIR-EDS) is corner radius end mills applied to roughing and finishing.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
HON JAN CUTTING TOOLS CO., LTD.
Product Description :
●Internal and external threading for both left-thread and right-thread with one tooling
●Safe machining operation and easier to reach the bottom inside the blind holes
●Evacuate the chip more efficiently than the traditional milling process. shank: 20mm~40mm , Internal Thread Insert: 12I , 14I, 21I, 30I , 40I , External Thread Insert: 14E, 21E, 30E , 40E
CHIN MING PRECISION TOOLS CO., LTD.
Product Description :
★ Single Crystal Diamond(Ultra Precision Cutting)：
【CVD- HV8,000 ~ 10,000】
【MCD- HV5,000 ~ 10,000】
Work Material：Ceramic, Gold / Silver / Aluminum / Copper / Zinc / Magnesium Alloy, Titanium Alloy, Graphite, Carbon Fiber / Glass Fiber, Wood, Bakelite, Acrylic, Stone, Electroless Nickel, Carbide.
★ Polycrystalline Compound Diamond【HV6,500 ~ 8,000】：
Work Material：Ceramic, Aluminum / Copper, Titanium Alloy, Graphite, Carbon Fiber / Glass Fiber, Wood, Bakelite, Acrylic, Stone, Carbide.
★ Polycrystalline Cubic Boron Nitride【HV3,000 ~ 5,000】：
Work Material：Hardened Steel(HRC45~65°), Powder Metallurgy.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
The “ i-Center ” is a trademark of Nine9,
the developer of the first indexable center drill in the world.(Patented)
Offering an indexable insert system for the 1st time, Nine9’s “i-Center ” design improves your process performance. Shortens set up and center drilling time.Increases tool life and reduces tooling costs.
● High Speed, High Feed Rate
• The special ground insert and rigid holder design facilitate high performance speed and feed rates. For example, drilling alloy steel
at 6000 rpm and feed rate of 600 mm/min. (0.1 mm/rev.).
● Excellent Repeatability
• The positioning repeatability of the insert is within 0.02 mm
(.0008”) in radial direction, thus ensuring conformity to any national
standards.
● Easy Tool Length Setting
• The axial position accuracy of the insert is 0.05 mm (.002”). It is
not necessary to reset the tool length when changing or cutting edge.
● Extended Tool Life
• Coolant can be supplied through the center of the holder to increase performance and extend tool life.
• Insert geometry, grades and coating process are specifically engineered for centering applications.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
Nine9 chamfer mill is designed for chamfering and countersinking with an indexable insert.
The insert is a specifically designed for use in high speed machining ; the multiple flutes
provide for increased feed rate, optimizing performance and reducing cutting time.
High performance chamfer tool for upgrading your machining process.
For front and back chamfering. Eliminates 2nd operation or deburring time.
● Excellent Repeatability
• Smallest Indexable counter sink, diameter ø7 mm.
• The insert is dual-relief angle, specially edge honning and optimized coated for high cutting speed.
• Optimized the number of teeth on the holder to achieve higher feed rate.
● Economical
• Each insert has 4 cutting edges.
• Long tool life.
● Applications
• For front and back chamfering.
• 90° counter sink and 45° chamfering.
• For counter sink, circular chamfering, contour chamfering and face milling.
JIN LI CHENG CUTTING TOOL CO., LTD.
Product Description :
※Special chip out and geometric flute design. Excellent chip out perfomance without burrs. For various materials including the ductile stainless steel.
※Multinational patented drill point angle and double ute design. Great wear out resistance Keep long time precise drilling.
※With both function of Drill and Reamer design and its accuracy tolerance is within 0.01mm. It also can save tool change time while processing.
※With European carbide round bar and exclusive cutting angle design, We run the polish process on all the end mills, and it leads the tools easy to remove chips and keep the double life time than other competitors.
※Based on Europe composite coating with internal coolant holes, it leads the JLC at drill much longer life time and reduce customer lots of processing cost.
