Theme
Digital Transformation
Green Transformation
TAIHO TOOL MFG. CO., LTD.
Product Description :
The AERO series is very suitable for high-power equipment above 80KW.
It has a sharp cutting edges and grooves for great efficiency of discharging the chips. The coating is OSG's diamond coating with glossy surface. This bright and smooth surface optimizes the performance of the end mill, especially in aluminum alloy that weldability and lubricity are required.
The 3-short-blade type and center jet type (AERO-ETS, AERO-O-ETS) are corner radius end mills applied to roughing and finishing.
The 3-long-blade type and extra long blade type (AERO-ETL, AERO-EXTL) are corner radius end mills applied to roughing and finishing.
The 2-short-blade type (DLC-AIR-EDS) is corner radius end mills applied to roughing and finishing.
7-LEADERS CORP.
Product Description :
Multipurpose End Mills- 4 Flutes
Effectively decrease the vibration by various helix geometry and unequal flutes designs.
Big chip breaker is designed to reach high removal rate for various work materials.
Obviously improve tool life with Nano multilayer coating AlTiCrN.
Suitable for different kinds of materials cutting.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUALITY ENGRAVING in most materials.
The latest coated carbide grades help you to obtain higher speed and feed rate, dramatically reducing your cycle time.
● High Positive Rake Angle
• Indexable insert.
• Suitable for engraving all types of materials, such as plastic, non-ferrous metal, aluminum, copper, carbon steel and stainless steel.
● Multi-Side Grinding
• Full peripherally ground insert to ensure efficient repeatability.
• It performs excellently without producing any burrs, especially in copper, aluminum and stainless steel.
● High Speed, High Feed Rate
• Designed to run at high speed, up to 40,000 r.p.m.
• Feed rate 0.08mm (0.003”) / rev. apply to aluminum; 0.05mm (0.002”) / rev. apply to stainless steel.
• Reduces engraving cycle time!
● Economical
• Each indexable insert has 2 cutting edges.
• No resharpening required. Tool length is unchanged.
• No need to reset after changing insert or cutting edge.
• Excellent repeatability!
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
The “ i-Center ” is a trademark of Nine9,
the developer of the first indexable center drill in the world.(Patented)
Offering an indexable insert system for the 1st time, Nine9’s “i-Center ” design improves your process performance. Shortens set up and center drilling time.Increases tool life and reduces tooling costs.
● High Speed, High Feed Rate
• The special ground insert and rigid holder design facilitate high performance speed and feed rates. For example, drilling alloy steel
at 6000 rpm and feed rate of 600 mm/min. (0.1 mm/rev.).
● Excellent Repeatability
• The positioning repeatability of the insert is within 0.02 mm
(.0008”) in radial direction, thus ensuring conformity to any national
standards.
● Easy Tool Length Setting
• The axial position accuracy of the insert is 0.05 mm (.002”). It is
not necessary to reset the tool length when changing or cutting edge.
● Extended Tool Life
• Coolant can be supplied through the center of the holder to increase performance and extend tool life.
• Insert geometry, grades and coating process are specifically engineered for centering applications.
NINE-9 CUTTING TOOLS CO., LTD.
Product Description :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
SHARPMAX TOOL INC.
Product Description :
● Designed for high performance rough machining of
Titanium and other exotic materials.
● Optimum performance with maximum chip load per
tooth and efficient chip formation with higher
volume of metal removal.
● Exclusive PVD coating for long life.
● Vibration Free.
