展覽主題
數位轉型
綠色轉型
升山工業股份有限公司
產品描述 :
1. 此機種可裝一般直柄鑽頭來鑽孔及用斜柄
鑽頭來鑽孔,也可裝螺絲攻來攻牙,更可
以裝圓穴鑽刀來穿孔。
2. 鑽孔能力為6mm~32mm,攻牙能力
10mm~30mm,穿孔能力可達直徑
110mm。
3. 直接用圓軸齒排來帶動刀具上下行進作
業,使所鑽的孔及所攻的牙不會偏斜一
邊,加工物品質好,機體穩。
4. 可在運轉中快速變換轉速,可使操作人員
稱心快意選擇轉速,增進工作效率。
5. 鑽孔套筒、攻牙用扭力夾具、穴鑽柄組皆
為快速接頭設計,能快速更換,增進工作
效率。
6. 攻牙用扭力夾具,能安全控制扭力大小及
深度,可防止攻牙刀扭斷。
7. 正逆轉開關把手之特殊設計,使攻牙操作
隨心所欲,可不定點退刀,百分之百的控
制正逆轉,可專門應付硬度高的鋼鐵。
8. 擁有欠相保護裝置,只要外電源線其中一
條斷路,其它兩條電源線之電源就不能進
入馬達線圈內,可消除馬達因欠相所造成
的故障。
9. 擁有自動進刀切削力控制裝置:
遇到刀磨損,使鑽孔阻力超過大時,此裝
置會轉為斷續進刀或是停止進刀,鑽不太
下去,這時候就要拆下鑽刀來研磨使鋒
利,再裝上機台使用,刀具就不會過度損
壞,機體也較不會受損。
10 擁有三段間歇進刀斷屑裝置:
可依鑽刀、加工物材質的不同去選擇檔
位,來從事自動鑽孔作業,其能分階段屑
排鐵屑,鐵屑不會捲覆住鑽刀,使排屑順
暢。
11 擁有的三段自動進刀速率裝置:
自動鑽孔進刀之速率擁有0,0.15, 0.25
三段之裝置,可配合鑽刀大小及加工物材
質不同來選擇適當的檔位來操作。
大鎪科技股份有限公司
產品描述 :
This machine is an improved model from the Y Rail model, featuring similar functions.
Designed standard with 4-station hanger with two side doors on blasting chamber. To meet your specific production line requirements, additional hangers are available for the entire working environment. Contact us for further details.
Features:
1.The machine employs a PLC controller for continuous cycles of blasting operation.
2.The cycle motions are: the hanging shaft enters the blasting chamber, and then moves to a fixed position at a lower speed. The door closes automatically.
Once the door is closed, the blade starts running automatically, and the machine performs blasting. Once operation is accomplished, steel balls are supplied and the blade stops automatically.
When the blade comes to a complete stop, the door opens automatically. When the door opens to the fixed position, the chain conveyor quickly delivers the nest hanging rod into the blasting chamber, then moves forward at a lower speed to a fixed position.
The door closes automatically and performs the nest cycle of blasting operation.
台灣三軸科技有限公司
產品描述 :
產品優勢 :
光斑可調 0~300mm;
除鏽槍重量 0.7KG
系統時時監控運行狀態,對激光器、冷水機、控制板運行監控並收集運行狀態;
重量輕、體積小、人體工學設計握感舒適;
安全鎖觸碰出光;
操作簡易上手,對操作人員要求極低;
抗干擾強;
全密封結構內置水路、風路;
安全無污染,維護成本低;
手持式雷射除鏽清洗機,採用最新一代光纖雷射器,具有操作簡單、外觀小巧、清洗速度快等優勢,在五金材料除鏽、除油方面有著不可替代的清洗工藝。易於安裝、操控和實現自動化. 操作簡單,接通電,打開設備,即可進行無化學試劑、無介質、無塵、無水的清洗, 可手動調整焦點,貼合曲面清洗,清洗表面潔淨度高等優勢,能夠清除物件表面樹脂、油污、污漬、污垢、鏽蝕、塗層、鍍層、油漆.