展覽主題
數位轉型
綠色轉型
大鎪科技股份有限公司
產品描述 :
This machine is an improved model from the Y Rail model, featuring similar functions.
Designed standard with 4-station hanger with two side doors on blasting chamber. To meet your specific production line requirements, additional hangers are available for the entire working environment. Contact us for further details.
Features:
1.The machine employs a PLC controller for continuous cycles of blasting operation.
2.The cycle motions are: the hanging shaft enters the blasting chamber, and then moves to a fixed position at a lower speed. The door closes automatically.
Once the door is closed, the blade starts running automatically, and the machine performs blasting. Once operation is accomplished, steel balls are supplied and the blade stops automatically.
When the blade comes to a complete stop, the door opens automatically. When the door opens to the fixed position, the chain conveyor quickly delivers the nest hanging rod into the blasting chamber, then moves forward at a lower speed to a fixed position.
The door closes automatically and performs the nest cycle of blasting operation.
升山工業股份有限公司
產品描述 :
1. 此機種可裝一般直柄鑽頭來鑽孔及用斜柄
鑽頭來鑽孔,也可裝螺絲攻來攻牙,更可
以裝圓穴鑽刀來穿孔。
2. 鑽孔能力為6mm~32mm,攻牙能力
10mm~30mm,穿孔能力可達直徑
110mm。
3. 直接用圓軸齒排來帶動刀具上下行進作
業,使所鑽的孔及所攻的牙不會偏斜一
邊,加工物品質好,機體穩。
4. 可在運轉中快速變換轉速,可使操作人員
稱心快意選擇轉速,增進工作效率。
5. 鑽孔套筒、攻牙用扭力夾具、穴鑽柄組皆
為快速接頭設計,能快速更換,增進工作
效率。
6. 攻牙用扭力夾具,能安全控制扭力大小及
深度,可防止攻牙刀扭斷。
7. 正逆轉開關把手之特殊設計,使攻牙操作
隨心所欲,可不定點退刀,百分之百的控
制正逆轉,可專門應付硬度高的鋼鐵。
8. 擁有欠相保護裝置,只要外電源線其中一
條斷路,其它兩條電源線之電源就不能進
入馬達線圈內,可消除馬達因欠相所造成
的故障。
9. 擁有自動進刀切削力控制裝置:
遇到刀磨損,使鑽孔阻力超過大時,此裝
置會轉為斷續進刀或是停止進刀,鑽不太
下去,這時候就要拆下鑽刀來研磨使鋒
利,再裝上機台使用,刀具就不會過度損
壞,機體也較不會受損。
10 擁有三段間歇進刀斷屑裝置:
可依鑽刀、加工物材質的不同去選擇檔
位,來從事自動鑽孔作業,其能分階段屑
排鐵屑,鐵屑不會捲覆住鑽刀,使排屑順
暢。
11 擁有的三段自動進刀速率裝置:
自動鑽孔進刀之速率擁有0,0.15, 0.25
三段之裝置,可配合鑽刀大小及加工物材
質不同來選擇適當的檔位來操作。
虎門科技股份有限公司
產品描述 :
// SolidMEN-300的優點
✅ 材料: 不綁材料僅建議合格廠商,未來可自行選用適合材料
✨ 雷射: 德國 500W 水冷式雷射穩定性佳
⚡ 層厚: 層厚可控範圍 10~100μm (最小進給單位 10μm)
🛠️ 成品: 可列印多種金屬材料,強度超過鑄造,可作為表面後處理及拋光使用
🔬 研發: 不綁參數開放製程研究,未來材料無受限可自行開發
⬆️ 尺寸: 300x300x300 可製作大尺寸工件,另有機型可增大或縮小
💎 緻密度>99.5%,品質優於鑄造,近似鍛造
🤖 搭配遠端資訊與智能化視覺模組,方便製程穩定性及智慧化整合。
(即時錄影、列印層數/高度、雷射功率、粉未剩餘量、腔體含氧量、製程時間等)