展覽主題
數位轉型
綠色轉型
HYDROKOMP GmbH
產品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
睿欣實業股份有限公司
產品描述 :
CAPTRON 是首款電容式雙手控制安全開關的先鋒,產品擁有最高的安全等級(4級)且符合PL e和DIN EN ISO 13849-1認證。電容式的 “safeCAP” 雙手操作安全開關確保了重型機械以及存在傷害風險的自動化生產系統,例如印刷機和沖孔機,可被輕鬆地安全進行操控。
使用者同時按下連接到繼電器的兩個電容式按鈕,才能正常啟動機器。由一隻手或者由身體其他部位造成的錯誤的或者無意中的操作可被系統檢測出,在這種狀態下機器不會運行。
CAPTRON 供應 safeCAP 雙手控制安全開關以及其它相應的配套安全裝置,比如保護裝置或者用於桌面安裝的控制台。這些組合大大提升了安全性且通過了DIN EN 574認證。動態的觸摸式開關可檢測出干擾因素,比如污垢、灰塵或其他異物等。在使用一次性手套或者工作手套進行操作時,開關也可被正常啟動。
觸摸開關為全電子式設計,為全天候“抗疲勞”式,可被持續使用,且具有超耐用、可靠及堅固的特性。
HYDROKOMP GmbH
產品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.