展覽主題
數位轉型
綠色轉型
杰松自動化有限公司
產品描述 :
CytroPac是博士力士樂最新的集成式油壓動力單元,結合變頻馬達、液壓泵、油箱、過濾器、汙染指示等動力單元於一身,並具備與未來5G通訊世代接軌的乙太網路傳輸介面,真正體現高性能硬體與無遠弗屆軟體介面的完美整合。
安靜、節能、穩定、靈活調配等傳統油壓動力單元難以達到的性能表現,是讓Cytropac顯得突出與讓人期待的優勢,歡迎和我們一起來到未來工廠!
培凱有限公司
產品描述 :
HiPerSeal®是一種U型鐵氟龍內裝特殊彈簧的高性能彈簧密封件,俗稱彈簧油封或彈簧致動油封。鐵氟龍彈簧油封是由適當的彈簧力加上系統流體壓力,將密封唇(面)頂出而輕輕壓住被密封的金屬面以產生優異密封的效果。彈簧的致動效應可以克服金屬配合面的輕微偏心以及密封唇的磨耗,而持續保有預期的密封性能。它能利用各種特殊彈簧來克服鐵氟龍或其他高性能橡膠塑料的彈性問題,開發出可取代絕大數應用於靜態或動態(往復或旋轉運動)的密封件。而彈簧可因應不同的使用環境,選用不鏽鋼、Elgiloy®、Hastelloy® 等,故可應用於各種高溫腐蝕流體的場合。我們提供廣泛的彈簧選擇,其中包含斜圈彈簧(C型彈簧 - Canted Coil Spring)、螺旋彈簧(H型彈簧 - Helical Spring)、懸臂彈簧(V型彈簧 - Cantilever Spring)。
培凱有限公司
產品描述 :
培凱在密封領域的貢獻就是能創造全方位的密封解決方案。縱使對於極為複雜的密封介質也能駕輕就熟。
機械軸封是目前最理想的密封方式,對於任何條件(尤其高溫&高壓&高黏度(沉積物)&高速&大口徑等)皆能提供最適合的對應方式,最重要的是我們有非常專業的技術團隊可及時提出解決方案並量身訂製您所期待的設計規劃。
再者,站在使用者角度將極為複雜的工況&條件透過材料的特性&產品機能的擴充創造機械軸封最大的使用極限與價值,讓密封技術變得很簡單。
HYDROKOMP GmbH
產品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
富茂精機股份有限公司
產品描述 :
短型,高速,輕量型,迴轉油壓缸
設計有檢知裝置機構,可裝置感應式近接開關,行程容易調整,可確認油壓缸正確動作
內建逆止閥自鎖安全機構及內置壓力洩壓閥
兩用型,安裝時可由前端與後端鎖固
洩油孔配管務必單獨接回油壓槽,以避免產生背壓
HYDROKOMP GmbH
產品描述 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
培凱有限公司
產品描述 :
[軸承隔離器]顧名思義是針對轉動設備滾動軸承的保護而開發的密封裝置,可取代傳統的唇形密封件(亦稱為橡膠油封),利用特殊配置的迷宮環組合,不但消除了轉動軸被唇形密封磨損而導致的軸心磨損,其軸承也因異物或水氣的侵入而引起潤滑油的劣化&失效問題,軸承隔離器可有效延長軸承與轉動軸心的使用壽命。另外因無對磨面的接觸故也無元件磨耗與汙染問題,整個密封件材料以耐熱自潤性及高強度的特殊填料聚四氟乙烯成搭配FKM (Viton) O型環非常適用於軸承轉動設備嚴苛的環境。
HYDROKOMP GmbH
產品描述 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.