展覽主題
數位轉型
綠色轉型
彰化振榮油機股份有限公司
產品描述 :
1. 由PLC控制，需搭配容積式分配器使用。如搭配CAB與CBB分配器，為動作時出油，CDB與T型分配器則為間歇時出油。
2. 優點為「定量給油」，容積式分配器之每個出油孔流量均相同。
3. 本機加裝火花消除器，避免電流瞬間產生之火花對PLC產生干擾，以增加使用壽命。
4. 附壓力開關裝置，出廠設定啟動壓力為8kgf/c㎡，可檢查油路有無破損，並可確保潤滑點所需之潤滑油量。壓力開關標準規格為NC常閉接點，即壓力沒有達到預設值時會產生異常訊號，亦可選擇NO常開接點，訂購時請先註明。
5. 附有浮動開關，即液位檢知裝置，即油量過低時，能自動發出異常訊號，浮動開關標準規格為下通電接點，即油位異常時會產生異常訊息，亦可選擇上通電接點，訂購時請先註明。
6. 附強制給油鍵，可由人力強制注油。請勿持續按強制給油鍵超過3分鐘，若溫升達100℃馬達將啟動保護裝置，暫時停機約5分鐘。
7. 附壓力錶裝置，可查知壓力是否正常。
8. 適用於嚴格要求潤滑油流量一致之機械設備。一般常用於加工機、射出機等機械設備。
HYDROKOMP GmbH
產品描述 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
