展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
KTR TAIWAN LTD.
製品の説明 :
The recently developed DATAFLEX® 16 is available for measuring torque ranges of 10 Nm, 30 Nm and 50 Nm. The torque is measured using the well-approved technology of wire strain gauges combined with the latest electronic components.
The torque signals are processed without contact at a high resolution of 24 bit achieving an accuracy of 0.1 % of the terminal value. Supplementary to torque measuring the size 16 has a speed encoder providing two signals with a resolution of 360 pulses per revolution.
LIS AUTOMATIC CONTROLLED CO., LTD.
製品の説明 :
The PJ-30VT is a frequency control (variable volume) complex system. Supplied for maximum 70bar (1000psi), 100bar (1500psi) or 140bar (2000psi) working pressure to Swiss Lathes, CNC Lathes, and Machining Center. This system carries the LIS Automatic patent high-performance centrifugal filtration device, extended the lifetime of the consumables, and also lets the system more stable. Designed for the restricted tank capacity machine, reduced the problems of the tank foaming and overheat effectively.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
HOLD WELL INDUSTRIAL CO., LTD.
製品の説明 :
1.It divides into Axial & Axial Offset & Radial Offset & Angle Adjustable Type
2.Driven Coupling Type divides into DIN1809, DIN5480, and SPUR MT TOEM (Baruffaldi), DIN 5482, HAAS, Mori Seiki…
3.The accuracy is within 0.003mm
4.It can be applied on left and right hand turret.
KING NICE TECH.CO., LTD.
製品の説明 :
▎Liquid filter purification, easy removal.
▎ Patented technology - easily correspond with liquid,water-soluble and Pure-oil Auto.
▎ Processing can easily recover swarf and sediment without stopping.
▎ The highest filtration accuracy can correspond to 5 nano.
▎ Solve the problem of long-term deposit on CNC water tanks such as iron chips,aluminum powder,fine sediment,etc.after machining.
▎ Widely used in metal cutting, aluminum machining,grinding process,engineering plastics, etc.
OSCAR E.D.M. COMPANY LTD.
製品の説明 :
Quick Integration
EX/EXD Series electrical discharge
machine, capable of easy integrated with
MES system, online measurement,
storage system and etc via OPCUA, API.
Smart Production line
Actual application on automobile moulding industry in
Europe. EX series sinker EDM integrated with MES and
milling machine where perform the production just-intime
without any interruption. By increasing 30% of
overall equipment effectivenss (OEE), 2 EDM will then
bring out extra 3,000 hours working time per year
A Being Kou Tools Co., Ltd.
製品の説明 :
MicroCentric was founded in 1969. 50 years of advancing engineering and high-quality manufacturing has earned MicroCentric the reputation as the global leader in precision workholding technology. Each MicroCentric product is backed by superior design, the highest quality materials and precision workmanship for reliable, long term performance and unmatched accuracy.
MicroCentric is renowned for building workholding products of unmatched precision and accuracy. Most MicroCentric’s precision chucks have a standard repeating accuracy of .0001″ (0.002mm), and many models are accurate to within .00005″ (0.001mm).
