展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
TOP POWER MACHINERY ENTERPRISE CO.
製品の説明 :
The latest crumb collection and +1um precision filtration machine. This bottom debris recovery filter is equipped with a 1.5-inch large suction pump, which can quickly collect and dry the bottom debris and sediment in the water tank, allowing customers to clean it conveniently. This machine is equipped with a multi-functional stainless steel filter barrel that can collect coarse bottom debris. At the same time, using our patented technology, there is no need to replace the filter barrel, and it can continuously perform precision filtration up to 1um, thereby intercepting and filtering impurities and suspended particles in the water.
PROTH INDUSTRIAL CO., LTD.
製品の説明 :
1.10" touch panel.
2.The Y-axis(cross) and Z-axis(vertical) are driven by serve motor.
3.Use MPG in Y-axis and Z-axis.
4.Use PLC controller.
5.Flow control regulator is used in longitudinal way for using well.
6.Auto down feed system includes auto dresser and compensation.
7.Machinable content : surface, criss-cross, plunge, form pitch.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
KAO FONG MACHINERY CO., LTD.
製品の説明 :
This series is the fix-column bridge type machining center which adopts fixed crossbeam and column, but moveable table . X and Y axes use the roller type linear guide way, and Z axis offers box way or linear guide way according to customer’s needs. In addition, it can be equipped with various types of manual attaching head (90 degrees milling head, universal head,extension head, multi-directional head etc.). Applicable to all kinds of parts processing, mold mold processing, aluminum parts and aerospace transportation parts processing industry etc.
GRINTIMATE PRECISION INDUSTRY CO., LTD.
製品の説明 :
a.Equipped with the exclusive hydrostatic spindle.
b.Equipped with the exclusive hydrostatic guideway .
c.The grinding wheel can be widened to 300mm with one-feeding grinding.
d.Headstock and tailstock both work with double sided synchronous.
e.Our products are on hundred percent designed and manufactured in Taiwan. To guarantee the stability of machine, all of the cast components go through a pressure relieve process
TANKO ENTERPRISE CO., LTD
製品の説明 :
► 5"x2" PU caster
► Two fixed and two swivel casters with brakes with total 400kg loading capacity
► Standard Drawer: 95% extension with 45kg loading capacity
► Patented KPQ-B hanger hooks set (12pcs) and a perforated board
► Chamfer design to reduce injury
► Drawer latch
► Anodized aluminum drawer handle
► Metal handles
► PVC mat
HO CHEN MACHINERY & ELECTRIC IND. CO., LTD.
製品の説明 :
X axis travel:
Single movement: 2550 mm (100") inch
Dual movement: 1275 mm (50") inch
YZ axes travel: 850x600 mm (33"x24") inch
※Y axis can be increased to 1300 mm(51") (Option)
※Z axis can be increased to 1000 mm(39") (Option)
Work table: 3100x1600 mm (122"x63") inch
Max. Workpiece: 4100x2050x1250 mm (161"x81"x49") inch
Max. Workpiece weight: 22000 kg
Max. electrode weight: 500 kg
Machine net weight: 29410 kg
Oil level: 110-1000mm (4"-39") inch
Occupy size(LxWxH): 6480x6600x4600 mm (255"x260"x181") inch
Work Table to platen:
600mm Z travel machine: 1138-1738mm (45"-68")
1000mm Z travel machine: 740-1740mm (29"-69")
Filter： 4
Paper filter：8
Capacity：11300 Liters
Machine Features
> Windows CE controller
> A dialog window with picture description.
> Special repaired frames to quicken the maintenance speed.
> Close-loop design of digital feedback on three axes of the machine significantly increases positioning precision and ORBIT-CUT machining accuracy and efficiency.
> Simple operation interface.
> Common function keys are located on the operational panel for direct use.
> Hot key setting.
> ATC (automatic tool change) and C-axis 360° index can be installed; the process of coarse machining to ultra-fine machining can be completed at one time.
> Dialogue diagram provides various hole-expanding modes such as quick search of edge, centers and datum marks.
> Rich color graphic (the same resolution as a PC screen).
> Automatic multi-step machining (coarse, medium coarse, medium fine, fine, superfine)—up to 10 steps.
> Unlimited number of machining conditions can be saved as machining archives. Each set of machining conditions can be edited, modified or stored. They are easy to edit and easy to find.
> Automatic origin search and multi-point coordinate memory capability.
> 1/2 design capability, ARC automatic discharge waveform detection and automatic adjustment.
> Automatic center position detection, automatic compensation, search of hole center and deepest point; fixed hole machining (cyclic mode, independent mode), which is suitable for different machining conditions; Radial, circular, square, linear (vector), coning, 45° hole-expanding machining.
> Three-axis beeline, two-axis arc, three-axis helix.
> Chinese/English versions interface, metric/British system switch and Z-axis quick up, quick down, slow up and slow down capability.
> Lateral machining, three axes, six directions (plane rotation).
> All alarms describe the source, date and exact time of problem occurrence.
> Optical scale is applied for close-loop position control, enabling extreme position for machining.
> Automatic editing—settings can be done according to type of material, work piece size, machining depth, one side die clearance, final current and rate of electrode wear.
> CNC models possess conventional capability of consistent level of energy discharge, achieving stable and rapid machining and smooth high quality on machining surface while the rate of electrode wear is still low.
> Monitor page indicates machining path and orbital pattern in use.
YIH KUAN ENT CO., LTD.
製品の説明 :
1. Semiautomatic processing angle head suitablel in all type of milling heads, can change the processing angle and also bring the powerful and high-quality cutting benefits for machine.
2.This product uses for Japanese gear grinding, so the spindle speed can up to 2000rpm and also can bring the powerful and high-quality cutting benefits for machine.
3. This product offer manual or semiautomatic two type for your optional.
4. This product offer one degree or five degree for your optional.
FINTEK INDUSTRY COMPANY LIMITED
製品の説明 :
Heavy-duty Hydraulic Shearing (Guillotine) Machine
Streamline and solid body frame designed, safety-oriented thinking
maximum cutting capacity in 6.5mm/ 3100mm mild steel
Build in high quality/stability hydraulic system with flexible touch screen and friendly NC operating interface auxiliary.
Absolutely is your best partner and indispensable production equipment in your factory
