展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
DKSH Taiwan Ltd.
製品の説明 :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
E-TECH MACHINERY INC.
製品の説明 :
EGP-2520CNC is a high-efficiency cylindrical grinding machine with ultimate reduction in footprint. With a floor space requirement of less than 1.8m2 and 500mm diameter grinding wheel, it is suitable for small workpieces machining. Distance between center is designed to be 200mm, the center height is 125mm, and the maximum weight of workpiece can be processed is 5 kilogram.
ACCUTEX TECHNOLOGIES CO., LTD.
製品の説明 :
Linear Shaft Motor
Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%
1/1000 High Resolution Signal Process
High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.
Stable Discharge Board (SD-Master)
Irregular Thickness Cutting
The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.
PCD Cutting & Graphite Machining Power supply
The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.
TAIHO TOOL MFG. CO., LTD.
製品の説明 :
AE-VM features good stiffness, unequal lead and helix angle to enhance anti-vibration.
New flute design fulfills better chip removing.
New Coating “DUARISE” provides advantage on lubricity, wearability, high temperature oxidation resistance, and muti-layer structure can prevent it from thermal cracking.
Standard Type and Short Blade Type(AE-VMS、AE-VMSS):Square, Radius, and 90°(-RA) end mill.
3D, 4D Long Blade Type(AE-VML):Square, Radius, and Chip-breaking flute(AE-VML-N) end mill.
Side Milling Type(AE-VMFE): Square, and Radius end mill.
7-LEADERS CORP.
製品の説明 :
Designed with left helix and right cutting flutes with unequal flute design.
Downward chip evacuation.
Application for reaming different steels below 62HRC, stainless steel, High temp alloys, cast iron, copper…and etc.
Extremely high reaming life with coolant holes for blade cooling.
Nano multilayer coating AlTiSiN with superior wear resistance is suitable for high hardness materials reaming.
Accuracy tolerance: H7 (m5)
0/+0.004mm
TAIWAN INSTRUMENT CO., LTD.
製品の説明 :
Pentax AMD3020 全自動影像尺寸量測儀,高解析瞬檢機,搭載雙遠心鏡頭,一鍵式量測自動對焦及卓越的尋邊演算法,配合全方位的環型燈,可調整不同的角度產生出更銳利化的邊界,具有2000 萬像素 CMOS 成像更清晰,360° 轉檯旋轉讓測量更全面,實現穩定的量測數據,加上即時的品質管制,控制生產中產生的誤差,控制生產時的品質,物鏡具廣視野及高精度兩種,內建0.1um光學尺可量測座標及各項幾和公差,並可一鍵匯出報表自訂抬頭,提供品管量測員省時、快速、準確的影像尺寸量測儀。
AMD 系列瞬檢機採用了雙遠心光學鏡頭,該鏡頭具有高景深、大視野等特點。
▪ 高景深
◇ 放寬對焦精細度的要求在景深範圍內都可準確量測。
▪ 大視野
◇ 無須耗時影像拼接,數秒內即可完成視野內的尺寸量測。
▪ 一次可同時測量高達 1024 個特徵
▪ 一次可同時測量多達 100 個工件
▪ 一鍵後,僅需 3 秒左右完成測量
BUFFALO MACHINERY CO., LTD.
製品の説明 :
Available with two or six pallets, AXILE’s automated G6 Motorized Pallet Changer (MPC) exchanges raw workpieces and finished parts via a loading bay at the back side of the machine. Operators can load raw workpieces, and inspect and unload finished parts, while machining continues in the vertical machining center 24/7, dramatically increasing operational efficiency.
Freedom and flexibility are core to the design concept, as the MPC solution can be inte-grated upon initial commissioning of the G6 machine, or at a later stage when production capacity expands. And with the MPC-2 (the two-pallet solution), manufacturers can em-brace a Flexible Manufacturing System (FMS), of 12, 24, or 36 pallets total, by integrating one to three machines and two loading stations, depending on the scale required.
With AXILE’s digitalized intelligent automation solutions, manufacturers can eliminate production bottlenecks and ramp up production.