展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
LEEKA INDUSTRIAL CO., LTD.
製品の説明 :
We produce draw latches with different kinds of size and specifications.
The material uses stainless steel and Iron.
Color: black powder coated or bright chrome.
The installation depends on different type of latches: horizontal or vertical installation and can be used with padlocks.
TAIWAN PRECISION GEAR CORP.
製品の説明 :
1. 提供7.5-200寬幅的比數範圍選擇。<br />
2. 于80-200的高減速比下，能提供較強的扭力值。<br />
3. 安全係數至少保持1.0，物超所值。<br />
4. 齒輪傳動效率高達90%<br />
5. 彈性的馬達選配，可依需求搭配交流、直流或無刷馬達。<br />
6. 出力端可選擇中空孔或實心出力軸。<br />
7. 採用高品質黃油潤滑，免加油，低維修成本。<br />
8. 低噪音，提供安靜的作業環境。<br />
9. 交流馬達可選用三相60-120W，單相70-90W<br />
10. 鋁合金接線盒，輕巧美觀，安全耐用。<br />
11. 馬達F絕緣等級，IP54，可選擇全密或半密設計。<br />
12. 可加裝剎車或配合變頻器與控制器，改變轉速。<br />
• 3 PHASE: 60W, 100W, 120W<br />
• 1 PHASE: 45W, 60W, 90W<br />
• 減速比：1:7.5-200<br />
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
TAI CHONG CO., LTD.
製品の説明 :
用途： CNC切削中心機，銑床，龍門銑床，電腦銑床等切削作業。<br />
特性：<br />
本體與面板一體成型加工完成。<br />
以電控操作，快速充脫磁場變換。<br />
以永久磁鐵吸著工件，沒有停電的危險性。<br />
吸磁作業面，螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊，針對變形平面，作平面加工，大量節省調整時間，提高工作效率。<br />
結構剛性佳，配合精度穩定，適合高精度加工作業。<br />
與強力型電磁鐵比較，大幅度節省電力消耗。<br />
防水效果最確實，保證不漏水，不漏電。<br />
平均吸磁力18kgf/cm2以上。
ACCUTEX TECHNOLOGIES CO., LTD.
製品の説明 :
Linear Shaft Motor
Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%
1/1000 High Resolution Signal Process
High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.
Stable Discharge Board (SD-Master)
Irregular Thickness Cutting
The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.
PCD Cutting & Graphite Machining Power supply
The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.
JASON AUTOMATION CO., LTD.
製品の説明 :
WRE(E) direct operated proportional directional control with integral feedback are available with or without on-board electronics (OBE). Positive overlap spools reduce leakage at center, while underlap spools can be utilized for closed-loop functions. Individual amplifiers are available, while OBE models are possible with either a voltage or current command.
Giant Red-Wood Int’l & Co. Ltd
製品の説明 :
RW-600A Hydraulic Riveting Machine (Mitsubishi 10” HMI)
(Without Feeding System)
-Safety Device to protect finger get injured
-Proportional Value Control System
-Double-Pumps hydraulic Designed
-Auto-Riveted Counting to avoid missing riveted
-Mitsubishi 10” HMI
-Control System: Mitsubishi PLC
-Pressure Range:2-53KN(6T)
-Horsepower：3HP
-C type throat depth：450mm
-C types throat height：400mm
-Power Voltage：220V Three-Phase
*Mitsubishi 10” HMI can ensure the pressure during the operation. It also can auto-check for faulty.
*Suitable Rivet：Nut up to M10, Bolt up to M8, FH Screw up to M6 (Carbon Steel)
* Proportional Value Control System: Specific Pressure adjust bottom designed, can adjust correctly pressure within 10 second, precision within+/-1%.
*Positive Stop System: Designed for soft working pieces to ensure the flat surface. Thickness accuracy up to +/-0.05mm
*OMRON 5” HMI can ensure the pressure during the operation. It also can auto-check faulty.
*Suitable Rivet：Nut up to M10, Bolt up to M8, FH Screw up to M6( Carbon Steel)
*Pressure control easy to operate: Specific Pressure adjust bottom designed, can adjust correctly pressure within 10 second, precision within+/-1%.
*Positive Stop System: Designed for soft working pieces to ensure the flat surface. Thickness accuracy up to +/-0.05mm
QUASER MACHINE TOOLS, INC.
製品の説明 :
The MV1 series machines have a legendary history of high quality and proven performance, the New MV184 series has an even greater degree of reliability and performance. The design concepts of the new MV184 series combine advanced technology, performance and value for various machining applications.
Quaser produces this machine layout with the state-of-the-art digital design. Taking into consideration easy repair to reduce downtime. The MV184 series is the choice to increase part production.
ACCUTEX TECHNOLOGIES CO., LTD.
製品の説明 :
Linear Shaft Motor
Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%
1/1000 High Resolution Signal Process
High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.
Stable Discharge Board (SD-Master)
Irregular Thickness Cutting
The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.
PCD Cutting & Graphite Machining Power supply
The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.
