展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
ICOP Technology Inc.
製品の説明 :
The QEC-M series is an EtherCAT master that uses a dual-core, independently operating DM&P Vortex86EX2 processor for real-time, reliable synchronous EtherCAT control. The master core of the processor serves as the Arduino development environment; the slave core of the processor serves as the Real-time EtherCAT master. The two cores exchange data via Inter-Processors Communications (IPC).
BLUM PRODUCTION METROLOGY CO., LTD.
製品の説明 :
• Measuring speed up to 3 m/min
• Precise non-lobing touch characteristics
• No-wear, optoelectronic measuring mechanism
• Easy pairing procedure between probe and receiver
• Use of up to 6 measuring systems with one receiver
• Extended battery life
• Precise measurement even with coolant
CHIEN CHENS MACHINERY CO., LTD.
製品の説明 :
Specification
Table size: 1850 x 650 mm
Longitudinal travel: 1500 mm
Cross travel: 800 mm
Y slide way width: 1000 mm
Z Slide high: MAX 800 mm
Z Slide way width: 500 mm
Spindle taper: NT#50(BT)
Spindle motor: 7.5HP / 4P
Spindle speed: 40~3000 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø40 mm P=8 C3
Net weight: 5500 kgs
GENTIGER MACHINERY INDUSTRIAL CO., LTD.
製品の説明 :
• Closed-type double-column structure, it increases structure dramatically increases the structural rigidity of the machine and maintains extraordinary stability at all times.
• Roller-type linear guideway on three axes, it achieves high loading resistance, high rigidity, long service life, low thermal growth, and low noise.
• Three linear guideways on the Y axis, it provides more stable support for the spindle head, which contributes to upgraded stability in machining.
• The 45° vertical horizontal swiveling head is applicable for both vertical and horizontal machining, increasing flexibility in machining applications.
FUI JET TECH CO., LTD
製品の説明 :
The zero-point positioning system is a normal clamping mechanism, which is opened during ventilation and the air pressure is cut off. When the zero-point positioning system is ventilated, the pressure will pass through the compressed spring inside the piston, causing the piston to rise, and the steel balls can retreat toward the water pump. When the air source is turned off, the spring will push back the piston, and the piston handle will The steel ball is pushed toward the middle, causing the ladder bolt to
HC FENG CO., LTD.
製品の説明 :
Replenishing Fluid automatically, accurate cutting fluid concentration. One equipment to multiple CNC machining centers. The supply line can be as long as 20 meters.
#Filtration by 3 filters #Sterilization by ozone # Oil-water mixer to precise mixing 0-10% cutting fluid #Stirring device avoid cutting fluid become stagnant water. #oil tank level meter for 50 gallon barrel low level detection.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
OCEAN TECHNOLOGIES CO., LTD.
製品の説明 :
CNC Drilling EDM —RIVER 1000
Ocean Technologies' state-of-the-art product is designed with Five-axis tool center point (TCP) control
(X, Y, Z, A, B five-axis synchronization) drilling on irregular shared workpiece or special alloy steel parts.
The software can be break through and diffuser Shape Technologies to meet aerospace industry.
QUASER MACHINE TOOLS, INC.
製品の説明 :
The large Z axis span of HX404 allows the machine to deal with high work pieces and to strengthen machining stability with high rigidity.
The HX404 utilizes W-shaped Z axis telescopic covers to deal with stacked chips, combined with the integrated coolant wash, internal chip augers and external lift up chip conveyor, enhances the management of chip disposal.
In addition, the easy operation and ergonomic accessibility for HX404 allow s operator easily to reach machining work piece, spindle and load/unload station. The HX404 also features small floor space, which makes the best space utilization for clients.
