展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
擺脫時間、地點的限制，利用自動化生產解決方案再創生產率新高！無需人工操作，24小時不停機生產，製造大量、高質量物件，使用 Formlabs 自動化解決方案（包含 Form Auto、群機管理和高容量樹脂系統），在 3D 列印工作流程中更高效的工作並重新定義生產能力。在不增加列印機管理複雜性的情況下擴展您的零件生產。從任何地方點擊發送，Formlabs 自動化解決方案將處理剩下的工作流程。
【最大程度地降低每個零件的成本，節省高達 80% 的勞動力】
在 Form Auto 出現之前，每個完成的零件都需要在後處理之前從成型平台上手動移除。Form Auto 透過將 Formlabs 獲得專利的「快速剝離技術」與「成型平台 V2 」結合使用，完全自動化地移除零件。蒐集的零件被放置在防紫外線的容器中，無縫批量轉移到 Form Wash。
【24 小時不間斷 3D 列印，無需額外程序】
Form Auto 自動化生產系統旨在不閒置列印機、不讓列印物件在序列中等待，無論現場是否有操作人雃，Form Auto 始終準備好開始下一次列印。 隨時隨地構建多列印機群，從辦公室點擊「列印」，立即在生產間開始生產。透過群機管理中的圖像和影片遠程監控和審查成品零件，設備內相機在完成時捕獲每個列印件來保存每個部分的記錄。
SCN MACHINERY CO., LTD
製品の説明 :
180°油壓反轉合模機 - SDP series<br />
<br />
Tonnage: 50 - 600 ton<br />
Bolster Area: 1000 x 800 - 4500 x 3000 mm<br />
<br />
龍門型高強性、高精度機身設計，操作簡單的控制系統。<br />
動作精確，機台易操作，可減少勞動者的勞累，提高工作安全。<br />
適用於各類精密成型模具精修。(沖壓模、射出模、鋁壓鑄模)<br />
上模可180°完全翻轉，方便工作人員精修模具。<br />
標準附件：10"LCD觸控螢幕。<br />
符合ISO 9001:2015認證
USYNC INC.
製品の説明 :
a. Through UE80CG, easy to operate.
b. It's flexibility.Not only use UE80CG but also use original G code on Mitsubishi controller.
c. Quickly set coordinate on "Easy set" function, it can reduce error form human operation.
d. It doesn't use G code to edit wheel's sharp,use drawing type to edit wheel's sharp.
JIN TAIRY ELECTRIC CO., LTD.
製品の説明 :
JPS Technical Specifications
• Input voltage regulation range: rated voltage±15%
• Output efficiency: more than 95%
• Output stability rate: rated voltage±1%
• Waveform distortion: No distortion (compared with input waveform)
• Overload capacity: Above 150% of the rated output current
• Working environment: -0C~+40C
• Induction time: less than 0.1 seconds (less than 5 weeks)
• Working humidity: 95%
JPS Features
• Intelligent logic voltage regulation method
• Self-detection function
• LED indicator on the panel
• Patented bypass device included
• Large-range over-high and low-voltage protection device
• Under-phase instantaneous power failure short-circuit protection device
• Prevent activation of over-voltage device (SOVP)
Electronic double circuit panel design
• The internal panel voltage can monitor the three-phase voltage
• The DIP switch function is easy to set up
• Separated voltage stabilization design, three-phase unbalanced 100%
• Taiwan Patent No. 60215 62577
• Mainland Patent No. 12559 5390066
ADLEE POWERTRONIC CO., LTD.
製品の説明 :
●Brushless DC Motor
1. Minimize EMI and maintenance free. Low noise.
2. Specialized design to have smooth shaft rotation and improved reliability.
3. Brushless DC motor is light weight and compact size, higher power density, higher torque density and higher efficiency than conventional motors.
4. The structure has an excellent behavior in energy saving during heavy load operation. The high efficiency range is much wider than other motors too.
5. Built-in NTC thermal resistor to prevent over heat problem.
●AC Driver
1. Available for all control interfaces, ex. RS 485, direct signal, PLC, HMI.
2. Convenient 220VAC driver power input from 60W. No more 24VDC power supply.
3. Built-in 24VDC mechanical brake control power.
4. Real motor speed display and signal output.
5. Panel control is always enabled with removed control or terminal control or RS485 control. Convenient for system set up or maintenance.
6. Excellent speed stability. Open loop and close loop speed control for selection.
7. With 0~5VDC, 0~10VDC and 4~20mA speed analog input.
8. Over current / heat / voltage, electric motor lock protection.
